Jump to content
SAU Community

Recommended Posts

To save having to actually work out what the problem is myself, I thought I'd let all the guru's on here diagnose the problem :D

Symptoms

1) Car runs fine sometimes when flat out

2) Other times it missfires. Missfire can occur from 3000rpm right up to 7,200.

3) Engine check light has now come on three seperate times

The car

1) Is stock except for 9psi boost

2) May have been zooming around a track at the time :)

BTW, does anyone else have pretty rainbow patterns on their fuel rail?

Link to comment
https://www.sau.com.au/forums/topic/23056-a-contest-whats-causing-the-missfire/
Share on other sites

You bum! Have time to go to EC but no time to get your hands dirty! Pansy boy! :P

Take the plugs out and get some sand paper and lightly sand the top and see if that does the trick. If not then it's not your plugs.

Duncan i have this same problem at the moment. I had new plugs in but changed them 2 days ago anyways to irriduim with .8mm gap. i have exhaust, cooler, boost to 9psi. When i 1st changed the plugs it worked well on 8-9 psi but after a big night cruising last night (gave it a bit!) and i put it up to 10 for a while then it began again... So i lowered boost back to 8 and now it does it non stop. i think its the coilovers, which is apparently a very expensive fix ($1000 and up).. keep me in touch if you hear anything new.

Duncan,

Sh!t man it could be any of those things. I personally over the last 4-5 years of owning a Skyline have seen the following cause problems with miss fire on my car.

My spark plugs, they were 10,000km old and drifted past 1.3mm. 1hr and $20 to fix.

My Air Flow meter, loose wire in AFM, 1hr to fix, $300 for a second hand one.

Dirty Inj, bad fuel in country NSW, 1hr work and a bottle of wine to my local workshop to use the ultrasonic cleaner and flow checker.

Coil pack not earthed properly, after changing my spark plugs I did not seat one of my DIY packs correctly. 1hr to fix and a kick in the ass for being stupid.

Reset ECU, the fuzzy logic can some times be a bad thing. 3-4 hours if you are at fatz house, hmmm beer.

Other problems I have seen from other members, fuel pressure / regulator, faulty spark packs, fuel pump. Never fixed em so can’t comment.

Personally start with the plugs as most the other issues produced more than a slight miss fire, it was more go / no go.

Well, thanks to everyone that's replied, she's at the mechanic today (apparently they know how to open the big lid at the front and do stuff under it to fix things).

Keep voting, we should have an answer tonight.....

BTW, my vote was for alternator since it is intermittent.

it will be spark related.

but because you said it is only sometimes, I will go with the coil packs.

My one started off that way, it would come and go...

at first it was just an occasional hicup, then it would miss for longer, then eventually that particular coilpack completely died.

this makes it easier to find..

bought a second hand one fo $40 problem solved..

the most annoying thing about it being an intermitent thing is that it makes it hard to find which coil pack it is..

What ever it is , it must be still in the shop - went in of friday - now Sunday and no indication from Duncan yet.

So, prolly not plugs as that would have been done first, and Duncan would have his car back and have told us what it was.

Or , not.

I stick by my original analysis.

:D

:oops:

sorry b-man, yeah it is back but not driven yet. I told them your theory and they had a look, apparently all conrods are still within the block (not sure how they can tell tho :confused: )

They checked plugs (apparently they ARE under the bonnet!) and cleaned the AFM....but since it was always intermittent I'm not 100% sure its fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...