Jump to content
SAU Community

Recommended Posts

Item: Twin turbo setup to suit RB25 head. Complete from filters to dump pipes. Twin T3/T4 turbos, manifold, 48mm turbosmart wastegate, K&N filters, braided oil and water lines, 3" dump pipes

Condition: Great

Price: $4200 or for $4700 and will throw in a RB25 5 speed

To Fit: (What car) Nissan with RB25 head

Location: Tasmania

Contact: Best to contact me here

Comments: Have changed plans and going for a big single turbo setup. These made 399rwkw @ 17psi on my old RB25

2530tt.jpg

Turbos.jpg

2530.jpg

Link to comment
https://www.sau.com.au/forums/topic/231412-twin-turbo-setup-to-suit-25-head/
Share on other sites

On the old RB25 and manual. It drove like your average modded skyline until about 4200 as the boost started coming by 6000 it was full boost and the tyres turn to smoke in the first 4 gears :P

Was running Haltech E11v2, 1000cc injectors, Tomei Cams and pistons, Greddy plenum and 85mm throttlebody

The pics above are my new engine. 25/30

Im not running the vct.

On my 25/30 with a C4 they make 15psi by 4500rpm running the same tune as the old 25

  • 2 weeks later...

hey mate can i get some more info on the turbos? what make are they, how many k's have they done, what age are they, rollerbearing, do they have much play or any leaks/issues at all? i was looking at a new to4z set up but this does look nice and im sure would go hard. are you negotiable at all and would you do COD as its a fair bit of cash to send to a random bank account lol btw im in bris, thanks mate.

  • 4 weeks later...
  • 1 month later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...