Jump to content
SAU Community

Recommended Posts

This is for anyone who has an R32 and is thinking of paying someone to fit their cooler.

After getting quotes of around $650 to fit my intercooler, I decided that the money was better spent on beer, so my brother and I went to work fitting the thing :)

It was actually surprisingly easy, and let me be the first to admit that my mechanical skills aren't that flash. I pulled the front bar off, removed all the stock cooler components including supports, pipes etc but left the pipes that are in the engine bay.

I then had to cut a few parts of the metal supports to fit the cooler and piping in, but nothing major. Luckily for me, it appears that my car probably had a front mount in Japan so the big hole in the support bar at the front had already been done.

I then drilled 2 holes in the support bar and bolted the cooler to that. The piping then went out of the cooler on the drivers side and back underneath, running along the length of the front of the car to meet up with the stock piping.

It took about a day in total but now my car feels HEAPS better!! I'm going to put it on the dyno and get the timing and boost set properly and then take it to the drags :(

Anyway I thought I'd write this in case other people were going to be lazy and get someone to fit their cooler for them! Don't be lazy fit it yourself it's not that hard!! Instead of paying $650 it cost me about $180 for all the parts.

You've also gotta have a few brews to hand when undertaking such an operation :) :alcoholic

;)

oh here's a pic of how we did it

409james_bar.JPG

Link to comment
https://www.sau.com.au/forums/topic/23142-diy-r32-cooler-install/
Share on other sites

JiMiH, i am almost ready to do my own FMIC installation.....my 600x300x76 Hybrid is sitting in my room......anyhow, was it easy to route the piping back to the standard pipes? Will that 180 bend on the drivers side affect velocity? What material did you use for the piping.... I think i'm going to use grade 304 stainless. What size is your cooler?

Your install job looks neato btw...

Regards,

Scott

Scott,

it was pretty easy to route the piping back to the original pipes. You've just gotta be careful with your measuring. For the 180deg bend I bought a donut and then cut it in half. This way you get the tightest bend. I had to angle it downwards so it would fit behind the cooler, and in front of the radiator. It also has to go slightly below that fan on front of the radiator. I'm not sure what effect the 180deg bend has, but it doesn't seem to be any laggier than stock so I assume it hasn't had any negative effects :D

My cooler is exactly the same as yours, just not branded a Hybrid. Same dimensions etc also.

The bits I bought were :

1 x 2.5" donut

2 x 90deg 2.5" mandrel bends

2 x 3" ---> 2.5" pipe reducer

2m of 2.5" piping

yeah I mounted mine to the bar above the cooler ... not sure if it's strong enough but the piping holds it, and the whole things as tight as a nun's snatch :P but i'm also get some brackets welded to the underside soon to give it some extra strength.

Hope that helps some :)

I was in the same boat, even though I had purchased the HKS Kit for the R32 GTST, I have no technical skills at all. got a mate who knows what he is doing and we knocked it over on a saturday arvo. cut 1 hole and it looks sweet as. HKS kit fits with no modification bar that 1 hole we had to cut, although I should mention there was already a dotted line in the chasie where a pipe should go... guess the GTR's and GTS's share a few similarities

didn't have to cut the support bar or bumper though, fit straight on. cost me $1300.00 delivered to me. we cut out the front bumper and put mesh in it though, for more of a sporty look :D:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...