Jump to content
SAU Community

Recommended Posts

Firstly you dont say how many klm's are supposed to be on it. I would never pay much attention to klm's on an import but would judge the car more by the overall condition, how much you have to pay for it, what year model it is, if it is raws,sevs or 15 year old mod plate compliance, what if any mods are on the car these are all factors to consider and no offence but the pics you have posted are not the best quality so is difficult to asses the condition of the car. answer these questions and it will be a lot easier to give you an opinion.

I seen this car before...

1990 model - 68,655km, comes with:

12 months rego with RWC

Full service history in japan

HKS hipermax suspension

HKS oil filter relocation kit

HKS oil cooler

Alpine CD stacker & Apline monitor in the car

N1 front bar & bonnet extension.

Seems alright to me. Come with an alarm?

If your having trouble deciding then get a mate with knowledge or pay a workshop to have a good look at it.

Best of luck mate

Edited by bluey33

^^^ +1

And after you look at it (with your suspicious eyes & ears) & if you're still interested, my wife can read Japanese so if the auction papers are available,

I can give you a translation.

Also look at the logs (if available), scan the service entries (yes, in Japanese) and PM me with those too, so you can get back to the Service Technicians in Japan with more Qs.

PM me with your E-mail address too eh?

Regards,

Terry

^^LOL! Yeah man its a genuine GTR.

Its even got red R34 GTR rocker covers on it so it looks even better.

Going from what bluey33 said, its sound pretty good.

1990 model with 68,655 km = Driven 3814 km per year (Approx). So it done hardly any K's

BUT if you get the chance to go look at the car, have a listen to it when it switched on and check EVERYTHING. Take a mechanic with you.

Genuine GTR yes, As for as the quality of it, I don't think anyone here can tell you to buy it.

Has some positives,

low kms

service history

looks clean

plenum not flaking

couple nice modifications

As said above get someone with great knowledge of these cars to have a look.

And Listen to the car both on a cold start and warm start.

And also check everything as (OO)SKYLINE(OO) said, and we mean everything.

This could also worry the seller and you may get some body language to show he is nervous and worried about you finding something.

Another i am looking at is this one.

R32GTR Vspec 93 model with factory Brembo brakes, full exhaust upgrade, 18 inch Work wheels, 120K genuine and sunroof.

2dqulwy.jpg

11kh386.jpg

Edited by BillyMako

looks like stretched tyres - drift look. Wonder if its been drifted. I know tyres don't say that but it is one negative on my books.

Also sunroof isn't factory so will want to hope it doesn't leak.

Noone is going to be able to help you out much at all as we are only judging by pics...

"Oh thats clean" is no where near good enough advice to buy a car.

Best off going ahead of it yourself or getting someone local to you to have a look at these cars.

If you are buying one from japan then it isn't all a guessing game but you need to find a broker you can trust (if there is one) :happy:

looks like stretched tyres - drift look. Wonder if its been drifted. I know tyres don't say that but it is one negative on my books.

Also sunroof isn't factory so will want to hope it doesn't leak.

Noone is going to be able to help you out much at all as we are only judging by pics...

"Oh thats clean" is no where near good enough advice to buy a car.

Best off going ahead of it yourself or getting someone local to you to have a look at these cars.

If you are buying one from japan then it isn't all a guessing game but you need to find a broker you can trust (if there is one) :happy:

How do you know that the sunroof isn't factory?

How do you know that the sunroof isn't factory?

Didnt know you could get a factory sunroof on a GTR, also if it was you would think it would have a rolled edge.. the photo make it look like it has a thick rubber mould around it. Factory roofs seem to be a bit more flush looking.. I could be wrong though!!!

Congrats mate, very nice.

Just a note of caution, don't pin your hopes on those time frames. I got really exited last time i imported cause was told similar, but transport went from 4 weeks to 8, and compliance from 2 weeks to 4.

But, on the positive side - hanging for it to get here makes it more enjoyable when you finally driver her away :-)

Will a cut in aftermarket sunroof affect compliance by any chance?

I was wondering that looking at the pics! Better hope it wasnt a dodgey job or if compliance/regency notice it at all or else its going to be a lemon :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...