Jump to content
SAU Community

Recommended Posts

Hey memberinos! lol. I have a quick question and a sticky situation in which i want peoples opinions for what i should do.

Quite a while ago i purchsed myself a 'Trial style' Bonnet made of FRP fibreglass, and now that i have parts of my bodykit and i wish to apply them to my 34, i only recently found out that FRP is technically just as illegal as opposed to having a carbon fibre hood on your car (Victorian laws). Im not sure if this is true or false, and i kind of feel stupid for not knowing, but is this correct guys?

If it isn't well, problem solved already! But if its not the news i want to hear then here is the situation i mentioned above.

Even if its technically illegal, (as most of us would), i still wish to use it in conjunction with my kit i purchased, the situation is, if i do apply it is there a way to make the hood heavier? So if cops lift it theres some sort of metal sheet underneath? Also is there a way to talk your way out of having one of them on, has anyone tried?

I wanted to originally paint it black like a 'jdm style' 'white car black hood' look, but i was thinking this might attract even more attention, so i guess painting it white will reduce that risk a bit. What are peoples opinion on this? I know alot of people on the street have FRP parts, but knowing my luck i will get defected asap. What would you guys do? would you slap it on or just leave it stock?

Cheers, Josh

Link to comment
https://www.sau.com.au/forums/topic/232187-off-with-his-hood/
Share on other sites

Some fiberglass bonnets are ADR approved.. So you could find out whether it is.. then use it.. or sell and buy one that is.. or just use it..

i vote the later cause unless u got defects up the wazoo or a cranky cop u should be fine

when you get pulled over the cops wont touch your car they will get you to open close things (from what i have experienced and been told about). so you can pretend its a heavy bonnet when opening it lol

I had the same thoughts and questions when i was deciding what to do a while ago. Don't know if it matters but i'm in vic, and got an r33.

i had a lot of advice, much of which was crap, heard carbon fibre was no good but i didn't want that look on my ride anyway, heard fibreglass is no good, someone told me it shatters bad in an accident and someone else said it wont bend like steel and will come through your windscreen and decapitate you... in the end i didn't know who's advise to take so i did my own thing...

I kept my steel bonnet, cut some designs in it and fibreglassed it up from underneath and moulded a little on top, then painted the whole thing stock and it looks awesome and is still heavy like steel and original, even when you knock on it sounds the same etc. nobody has ever said anything about it.

hope this helps, maybe an idea for you?

Very soon be illegal in QLD? Change in standards?

Thats a pitty because they apparently spend alot of effort in obtaining approval and I was very keen on getting one eventually.

Any word on why they will no longer be legal in QLD?

You are correct they are QLD approved.

i got a fibreglass bonnet, havent been pulled over yet, and i just got back from a road trip from mackay to gold coast and back and heaps of driving around gold coast a few cops saw my car and did nothing, on my way down i was over taking a car end up doing 140 and the cops where coming the other way and still didnt pull me over :)

Very soon be illegal in QLD? Change in standards?

Thats a pitty because they apparently spend alot of effort in obtaining approval and I was very keen on getting one eventually.

Any word on why they will no longer be legal in QLD?

You are correct they are QLD approved.

Hey, nah no idea when its happening but it is in the works. hopefully they make an exception for companys and ppl in QLD who have these kits. but i doubt it. i wanted 1 as an alternative cos i had a small accident and we worked out that it would be cheaper to get another bonnet then repair it.

regards chris

i wonder if you are in QLD, and have already purchased and installed an adr approved fibreglass bonnet, because the authorities told you it's legal, (and there was a cupcake party with balloons and shit, and ppl hugging eachother with big smiles, like a massive modifier's love fest - this part may not have happened) would you now be required to remove it? or would there have to be an allowance for bonnets fitted prior to the new laws. and if the latter, how would they know anyway?

i went through this, BLITS are not ADR approved, THey are aproved by the QLD transport auth not ADR's. QLD is the only state were u can use a Blits bonnet legaly and very soon they will be illeagle in QLD too. sorry but thats the facts

This is Wendy Owner of BLITS where did you get your facts from I would be very interested to hear where you got this information from as you seem to know more than we do we would appreciate you contacting us for a further discussion on this matter as it cannot go unnoticed and you need to make sure that what you say on forums like this is actual fact not just what you believe , will be waiting for you call on 0413749133 or work 07 55716122 and ask for me Wendy

lol busted... :D

i had a non approved fiberglass bonnet on my vt for yonks and yonks and even got pulled over.. never a mention on it..

i was told about this whole fiberglass through the window shit.. well if you crash at high enough sppeds to send fiberglass into you through the window then face it.. something else would f**k you anyways..

if its adr approved you can get a mod plate for it which should mean you shouldnt have to take it off..

adr wouldnt be approving items they were thinking of making illegal anyways.. blits and dmd both have adr approved bonnets.. but yes it is also best to check with ur states transport rules

Edited by .:: GimpS-R34 ::.
lol busted... :D

i had a non approved fiberglass bonnet on my vt for yonks and yonks and even got pulled over.. never a mention on it..

i was told about this whole fiberglass through the window shit.. well if you crash at high enough sppeds to send fiberglass into you through the window then face it.. something else would f**k you anyways..

if its adr approved you can get a mod plate for it which should mean you shouldnt have to take it off..

adr wouldnt be approving items they were thinking of making illegal anyways.. blits and dmd both have adr approved bonnets.. but yes it is also best to check with ur states transport rules

DMD are one of the agents for BLITS bonnets

the BLITS bonnets have been tested using the ADR specifications and they have been passed by Queensland transport for street legal use and don't need mod plates

some states don't require approval but this is going to change and we are working with them to comply with their regulations to get approval in every state

This is Wendy Owner of BLITS where did you get your facts from I would be very interested to hear where you got this information from as you seem to know more than we do we would appreciate you contacting us for a further discussion on this matter as it cannot go unnoticed and you need to make sure that what you say on forums like this is actual fact not just what you believe , will be waiting for you call on 0413749133 or work 07 55716122 and ask for me Wendy

Hey Wendy, u got Pm. if what i have said is incorrect my appoligies and please clear up the confusion. At no point was it my intention to discredit you or your company as i have based my statement only on what the WA roads technical department advised me although this could be incorrect. unlike some people im more then willing to admit if i'm wrong.

regards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...