Jump to content
SAU Community

Recommended Posts

Um, I've got an R32 GTR with lots of mods running about 300 RWKW and I'm running the std airbox. I heard that pods give a much more audiable induction noise, but that they must be boxed so as not to be sucking in the hot air from the engine bay.

If so how is this best executed? Are there any other implications of doing this? I guess I'd like a few more exciting noises as right now I've really only got injectors and exhaust. Be nice to hear the induction and the turbos.

Thoughts?

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/
Share on other sites

So you get your pods and then strap this over them. Where does the air get into the box? also ,what will this set up do for me? More induction nosie and will I hear the turbos? Cheers.

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4078053
Share on other sites

In all honesty your better off keeping the stock airbox.

There are a number of cars making BIG numbers off the R32 airbox...

Pods only decrease performance of a streeter, in/out of traffic etc. All it does it suck up hot air.

Gotta ask yourself what you want.

Noise or perfomance?

:(

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4078289
Share on other sites

thanks Nismoid. Performance isn't the issue as there is plenty of that. Just looking for a bit of added wank factor. If that's going to cost me performance, then I'll pass on it. I notice too there is some possibility of this mod being illegal unless engineering which sounds like a pain to me.

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4079148
Share on other sites

thanks Nismoid. Performance isn't the issue as there is plenty of that. Just looking for a bit of added wank factor. If that's going to cost me performance, then I'll pass on it. I notice too there is some possibility of this mod being illegal unless engineering which sounds like a pain to me.

Legally you'll be ok if they are not oiled pods.

EPA ruling states you are allowed one intake modification.

So if you have the stock cooler, pods are OK.

No Engineering required in that department.

BTW - (bit of shameless plugging here) You should join the SAU-Vic club :)

www.sauvic.com.au

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4079294
Share on other sites

Legally you'll be ok if they are not oiled pods.

EPA ruling states you are allowed one intake modification.

So if you have the stock cooler, pods are OK.

No Engineering required in that department.

BTW - (bit of shameless plugging here) You should join the SAU-Vic club :thumbsup:

www.sauvic.com.au

Wow, Victoria is lenient. No way you can do this in NSW. Pods equals defect, simple as that.

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4079742
Share on other sites

Wow, Victoria is lenient. No way you can do this in NSW. Pods equals defect, simple as that.

I thought in nsw pods were legal as long as they are secured and enclosed?

Vic is not so free on a gtst, as nismoid said only one intake mod so its either a fmic or pod filter, although a lot of people take the chance and run both with an atmo bov and then come on here complaining how all cops are arse holes because they got defected for mods that are pure wank factor and they know are illegal.

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4079759
Share on other sites

I thought in nsw pods were legal as long as they are secured and enclosed?

Vic is not so free on a gtst, as nismoid said only one intake mod so its either a fmic or pod filter, although a lot of people take the chance and run both with an atmo bov and then come on here complaining how all cops are arse holes because they got defected for mods that are pure wank factor and they know are illegal.

Yeah, sorry I should have clarified. Pods inside a air box are OK I think. Pods on their own, no way.

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4079766
Share on other sites

Legally you'll be ok if they are not oiled pods.

EPA ruling states you are allowed one intake modification.

So if you have the stock cooler, pods are OK.

No Engineering required in that department.

BTW - (bit of shameless plugging here) You should join the SAU-Vic club :D

www.sauvic.com.au

Yes I should :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/232339-pod-air-filters/#findComment-4079802
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...