Jump to content
SAU Community

Cd Err Fo - Error Message From Stacker

drifter_x
 Share

Recommended Posts

russky Collaborator

russky

Posted
Posted
if done with the correct interface lead - no loss at all. in regard to the previous fix onthe stacker - did you get the WHOLE lot changed or simply the dud guide replaced.

also to pop that JVC unit in you have to spend $6-700 more on panels, controllers and leads.

With my previoius fix? I just pressed button combination to manually eject or whatever I could find at G35 driver. After non-success for 10 min, it decided to spit it out. However, now it sounds like it has a mechanical issue.

Wow... Just to install the JVC thing 6-700 bucks... Is it because it is single DIN? Would double DIN be cheaper? Or it is just the way it is with changing head units?

  • 3 years later...
iseekool Veteran

iseekool

Posted
Posted

Hi all,

Thread revival!

I have a close family friend who has the same issue. He has V35 premium coupe with factory 6 stack Bose/Navi system. It has the same error as the OP mentioned.

The CD system makes a "grinding" sound and eventually stops. Radio and AUX seem to be OK.

Just wondering who would be the best contact in Melbourne to either fix the HU or replace it with an aftermarket one if need be.

The issue is rather sudden - there were no tell tale signes before the problem. We have tried doing the reset etc, with no avail.

We are not confident to pull apart the dash ourselves - So we prefer a "one stop" shop to perform the job.

thinktea Community Regular

thinktea

Posted
Posted (edited)

Hi all,

Thread revival!

I have a close family friend who has the same issue. He has V35 premium coupe with factory 6 stack Bose/Navi system. It has the same error as the OP mentioned.

The CD system makes a "grinding" sound and eventually stops. Radio and AUX seem to be OK.

Just wondering who would be the best contact in Melbourne to either fix the HU or replace it with an aftermarket one if need be.

The issue is rather sudden - there were no tell tale signes before the problem. We have tried doing the reset etc, with no avail.

We are not confident to pull apart the dash ourselves - So we prefer a "one stop" shop to perform the job.

Fixing it will probably cost more than replacing it.

For your one stop shop, tell your friend to give Nuwan a call. He is based in Bayswater.

He did my double DIN replacement with fascia and kit etc. He also did my immobiliser + alarm. No complaints and more importantly, he knows the Vs (complied over 60 of them) and has fairly reasonable pricing.

Tell him that Keith sent you. His number is 0422807393.

BTW, tell your mate he is welcome to join us for the Meet & Greet on Friday (24 Feb) at Garage Cafe in Carlton. See separate thread for details.

Cheers,

Keith

Edited by thinktea
iseekool Veteran

iseekool

Posted
Posted

Fixing it will probably cost more than replacing it.

For your one stop shop, tell your friend to give Nuwan a call. He is based in Bayswater.

He did my double DIN replacement with fascia and kit etc. He also did my immobiliser + alarm. No complaints and more importantly, he knows the Vs (complied over 60 of them) and has fairly reasonable pricing.

Tell him that Keith sent you. His number is 0422807393.

BTW, tell your mate he is welcome to join us for the Meet & Greet on Friday (24 Feb) at Garage Cafe in Carlton. See separate thread for details.

Cheers,

Keith

Thanks for that. I've passed on the info.

  • 3 months later...
AsM Rising Star

AsM

Posted
Posted

Got the same problem on my new import!!!!!!!! So anyone know if its gotten cheaper in the last 2 years to fix this problem or get a double din interface???

Also Chris, mate have you got around to fixing them in bulk???? ;)

AsM Rising Star

AsM

Posted
Posted

given that parts for these things died out in 2007 or so - nope. remove and start again.

How much is it for the double din fascia with dual zone aircon and harness to connect with factory Bose system.

Cheers

AsM Rising Star

AsM

Posted
Posted (edited)

send me a message with a photo of your dash. I will say not cheap though.

hey mate, tried to pm you with a picture, sau wouldnt let me, came back with a error saying "this member cannot receive message"

So here is a picture attached to the thread.

cheers

post-23808-0-61672700-1338306467_thumb.jpg

Edited by AsM
Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

hey mate, tried to pm you with a picture, sau wouldnt let me, came back with a error saying "this member cannot receive message"

So here is a picture attached to the thread.

cheers

Thats telling you that the tv is blocked whilst driving. It will go away if your handbrake is on and your stationery. An english conversion will fix that.

  • 1 month later...
AsM Rising Star

AsM

Posted
Posted

Hey mate, i heard 2006+ CD stackers are suppose to be better but i got a 2006 where the stacker works all 6 bays but doesnt play the actual disc's. Screen says "CHECK DISK" and 3 beeps. Any idea where this problem is comin from?

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...