Jump to content
SAU Community

Recommended Posts

Hi all,

We have an 97 RS4 Stagea, automatic, and we are trying to decide whether it will have the capability to tow around 2,000kg (a 180sx track car on a car trailer) without ruining the Stagea.

We will be fitting a heavy duty custom made towbar which is costing around 1k.. so we dont want to go ahead and do it, if its only going to ruin the car itself.

Basically, its either we take a chance with the Stagea or we have to sell it and buy a Ford Falcon :(

Has anyone here done anything similiar? and how did the Stagea handle? Any problems after towing?

Any opinions/help appreciated!

Thanks! :P

Edited by NiSmO`ChiCk

Hey mate,

Do you have the factory manual for the Stagea? there should be a tow rating in there.. Im not sure about the road rules in VIC but in NSW there are some heavy fines for towing a car without the correct tow rating. No point making a custom tow bar to suit your needs then getting a fine for using it..

Cheers

Johno

search for the stagea towbar thread, there's a guy here in canberra that makes a stag towbar that'll tow about 2.5t and it's only about $5-600 from memory. he has a jig for it and everything

D.

I've been known to tow a big load every now and then. I've got the towbar from Max in Canberra.

500kg trailer, 1700kg vt station wagon.

stagea_towing.jpg

it tows great. but fuel economy is appalling.

I've been known to tow a big load every now and then. I've got the towbar from Max in Canberra.

500kg trailer, 1700kg vt station wagon.

stagea_towing.jpg

it tows great. but fuel economy is appalling.

Hahaha, Duncan, it's usually the case that you see a shitbox towing a performance car, not the other way around like this!

that reminds me of the production car race club meeting the other night.

me: D'oh the gtr has a blown motor again

them: why not buy a v8 then?

me (confused): because I already have a tow car

:)

+1 towed a few times with my cefiro on the back.

+1 for MAX towbar in canberra (i live in SA, so got it delivered and fitted by a mobile fitter)

it's a 99 RS4 - as said above - tow's great (even with standard suss) - but is not the best fuel consumption while towing lol

here's a pic...

post-9092-1219796301_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...