Jump to content
SAU Community

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

well the 5.5 figure was based on the following calculation

step one

jump on scales

step two

read scaled weight of my own weight

three pick up bike

four jump back on scales

five subtract my human weight and be left with the bike wieight - which according to scales, was 5.5kg - which im sure is inaccurate figure

and not to disagree but picking it up it defs doesn't weigh 7 or higher you can lift it effortlessly with one finger

either way who cares

and to stop a fix gear bike you either skid by locking out your knees and pushing back on your back foot.. or

you just slow down your pedalling by gently pressing back on the pedals

both are very bad for your knees - also another thing to take into account riding fixgear, is if the wheels are turning, the pedals are turning too. so that means... if you're turning. you're pedalling.

if your turning - hard. you're leaning... hard...

hard leaning and flaining pedals is not good fun should your pedal contact the bitumen.

=)

more colourful love..

8d2a3_4114658564_f84550da30_b.jpg

31479_SNC107311.JPG.jpeg

vans-fuji-track-bike-1-540x303-494x277.jpg

continuum-bicycles.jpg

cdale-v3_4.jpg

cannondaleTrack.jpg

few more variants of the capo

CIMG2861-1.jpg

capo13.6resize.jpg

Capo_014.jpg

Cherry1.jpg

Edited by Mr Eps

I've got 2 road bikes and 2 MTB's.

I've got a Time Edge road bike w/ Campy Chorus and Easton wheels. Great bike. Also a Steel SS for commuting and training.

I've got a Cannondale Caffeine w/ a lefty fork for XC riding/mild trails, and a Nicholai CC w/ a 15mm Talas fork and some nice custom wheels for a technical riding. Beautiful bike.

Build up everything myself except the Cannondale. Love meching on my bikes and stuff. Nobody touches them but me. It's all in the small things.

I used to live to cycle. I was riding 20 hrs a week in 2008 then fcuked by back up and can't ride properly now. Had an MRI but just some minor disk protrusion and nothing that 'should' stop me riding. Need to chase this back up w/ my sports doc once I recover from my shoulder surgery 'cos can't live w/out cycling. :rolleyes: Fcuking depressed about it.

Edited by Tony de Wonderful

did a bit of research. the capo comes in at around 19 pounds. that's 8.6kg, which is still rather light, but about where i thought it would be. bikes are very decieving with their weight. 8kg can feel much lighter because it is on a bigger item, yet if you put 8kg into someone the size of a football it will feel much heavier.

and since i'm bored, to give you an idea of weights (all weights from manufacturer's websites):

wheels: 1995g pair

tyres: 350g each

cranks: 741g with 2 chainrings. second chainring only adds approx 50g

BB: 160 to 300g depending on model used

handlebars: 680g

stem: 180g

seat post: 345g

chain: approx 300g

so without frame, forks, pedals, freewheel, headset, brakes, seat, and grips you are up around 5kg. frame and forks would weigh close to 2kg. i have done a few build-ups using kitchen scales to weigh parts before putting the bike together and you get shocked the first time you do it. you pick the bike up and think it's really light and then tally up the weights and find that while it is light in comparison to other bikes, the actual weight of it is pretty high. the wheels are always the heaviest part of the bike.

also an interesting fact: the UCI (world cycling body) has a minimum weight that bikes must be to compete. it is 15lbs, which is around 6.8kg.

i cruise at about 35/45kmh most times so if fixie riders wanna tease me for riding with brakes and freewheel then be my guest and settle it in a race.

Hmmm 35 to 45 kmh? Solo?

35 maybe if you are a quite fit club rider. I'd still call that tempo really.

When I was living in Scotland in 07/08 I'd do 100 mile solo training riders at ~30 kmh.

Now if you can do a 40 k in 1 hr that is getting quite decent. That is not cruising by any means though.

Of course average speed is effected by many things..winds, road quality blah blah,. but there is no way you 'cruise' at 45 k/hr even as an elite rider.

Not a big fixie fan to be honest. I've got my SS and I used to train on that. I like brakes and ability to free wheel when I need it. Can't tolerate the 'cool fixie brigade'.

Edited by Tony de Wonderful

fyi, i just accidently watched a rogercordia video on youtube so i'm in a bad mood now

something else that shits me off about the current fixy trend is that people call them fixy's even if they aren't fixed wheel. if they have a freewheel they are single speeds and have been around for quite a few years now, but were generally mtb's or 26 or 29" bmx bikes with the odd road bike version. just because it can have a fixed wheel attached to it doesn't automatically make it a fixy. if you are running the freewheel then it is a single speed.

and technically 'fixy' isn't a new category of bike. they are just track bikes with brakes added to make them legal (if they have brakes). some will be done with retro styling to make them look like bikes that were around 50 years ago. even flat bar fixies aren't new. all that is different is that the original ones had bars shaped like a boomerang and the new ones have mtb bars on them. so to anyone that is riding a fixy to be different, you aren't different, you are just 40 years behind the rest of us. what next? is holden going to bring back the FJ and revive the old 186 and 202 engines to put in them? would they expect people to go and buy a car that handles like rhino on ice and has a 3.3L 6 cylinder engine that can put out an impressive 80kw? no. everyone would think it is a bucket of shit and not touch it. but apprently the cycling world is different. what was once shit and hopeless is now shit and hopeless but cool.

maybe i should see the guy i sed to work with who still has his original fixed wheel racer from when he raced back in the 60's so i can be cool. in fact i would be super cool because it even has a bent frame and forks from being crashed, meaning that when you turn the pedals nearly hit the front tyre because it sits about 2" back from where it should.

fyi, i just accidently watched a rogercordia video on youtube so i'm in a bad mood now

something else that shits me off about the current fixy trend is that people call them fixy's even if they aren't fixed wheel. if they have a freewheel they are single speeds and have been around for quite a few years now, but were generally mtb's or 26 or 29" bmx bikes with the odd road bike version. just because it can have a fixed wheel attached to it doesn't automatically make it a fixy. if you are running the freewheel then it is a single speed.

and technically 'fixy' isn't a new category of bike. they are just track bikes with brakes added to make them legal (if they have brakes). some will be done with retro styling to make them look like bikes that were around 50 years ago. even flat bar fixies aren't new. all that is different is that the original ones had bars shaped like a boomerang and the new ones have mtb bars on them. so to anyone that is riding a fixy to be different, you aren't different, you are just 40 years behind the rest of us. what next? is holden going to bring back the FJ and revive the old 186 and 202 engines to put in them? would they expect people to go and buy a car that handles like rhino on ice and has a 3.3L 6 cylinder engine that can put out an impressive 80kw? no. everyone would think it is a bucket of shit and not touch it. but apprently the cycling world is different. what was once shit and hopeless is now shit and hopeless but cool.

maybe i should see the guy i sed to work with who still has his original fixed wheel racer from when he raced back in the 60's so i can be cool. in fact i would be super cool because it even has a bent frame and forks from being crashed, meaning that when you turn the pedals nearly hit the front tyre because it sits about 2" back from where it should.

Point taken, i just like the look of simplicity... none of these fking gear levers and so on... pure, unadultered simplicity... :action-smiley-069:

i used to ride brakeless so that i could feel when i was going to fall over when pulling a manual..

so scary.

oh yeah, and i've never ridden a fixie, does the hub that locks up when i backpedal count? what was that, the geisha?

Edited by xALmoN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...