Jump to content
SAU Community

Recommended Posts

go right ahead then, up your pressure 5psi or 10 psi. Then add the rising rate of 1:1 to it. I run 22psi on some days, hmmm, that would give my standard injectors (if they were still fitted) a good, 20psi+ extra pressure. And people with the stock turbos, gonig from 7psi to 13psi, thats an extra 6psi, plus your claimed 5psi or even 10psi. 10psi to 15psi is not only a lot of pressure, but a lot more flow for these 15yo injectors..

You'd rather risk doing that, and blowing your engine, than getting new, fresh injectors?

Do you know how many GTR's and GTS-T's I have seen with stuffed injectors, running at standard pressure? Oh, but you're the expert. My bad.

Edited by The Mafia
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

I won't tune a car with a malpassi FPR now. I turn them away till they put a stock one back on or get a sard or similar

Last one i had on the dyno had 3 different AFR's on 3 power runs in a row... 11.5 12.5 and 13.5 LOL. those damn italians.. they think they are gods gift to the world.

ALSO i would get rid of that ECU. it is shit. Sorry to break the news to you.

yuck.

The last 2 cars I tuned, we had to take them off and bin them.

The AFR's would be from one extreme to another. You go WOT, the AFR's would go to 11:1, not touch the tune, then WOT again on the next run, 13:1. Put the standard one on, and AFR's would hold perfect.

They are junk.

have you found any info about the latency of your injectors yet chris?>

Nothing that refutes the info my current tune is based off unfortunately. Ah well, loving the flames for the moment! My fuel efficiency sucks though >.<

from what i have heard... but it depends on where you want to take the car...

for the 300 rwkw you mentioned you'll want a better ecu, bigger turbo (hks 3037 pro s or similar), injectors, fuel pump, Z32 afm OR map sensor'd ecu, cams are an option and then you'll be dancing around the limits of the stock engine.

300 rwkw is expensive in gtst form...

stick to 250-280 tops imho

280 is pretty good tho right? hmm alright...

i have heard good things about Power FC and also Wolf seems to have a few ppl happy with it..

what do you guys recommend?

Also will the SARD 550CC injectors do well with the power i want to reach?

Edited by palmer

yeah the 550's will be fine but as previously stated bombtrack is having latency issues with his... they are shooting fuel for too long and makin teh massif flames...

nismo 555's are probbaly the easiest option

power fc > wolf

haltech also a good ecu option...

ok

so get some Nismo 555 injectors, Z32 AFM, maybe some Cams and see how it runs with the EMS Stinger at the moment... if im happy ill leave it... if not sell the Stinger and get a Haltech or the Power FC

what fuel pump would be a good option?

the EMS stinger is a map sensor ecu so you wont need the Z32 AFM.

Just get the injectors turbo and see how you go with your ecu. if you like your engine and want it to last id get something else.

But try your luck. a new engine is only $1500

:D

Do you know how many GTR's and GTS-T's I have seen with stuffed injectors, running at standard pressure? Oh, but you're the expert. My bad.

I post this;

Discussing this with you seems pointless since you have nothing of substance to argue with.

Then you post this. You're blind, and possibly stupid.

I won't tune a car with a malpassi FPR now. I turn them away till they put a stock one back on or get a sard or similar

Last one i had on the dyno had 3 different AFR's on 3 power runs in a row... 11.5 12.5 and 13.5 LOL. those damn italians.. they think they are gods gift to the world.

I said exactly this about 10 posts back, and agree with you 100% Guilt-Toy, I refuse to tune cars with them installed because they completely waste my time trying to diagnose fuel pressure problems.

Factory ones work fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...