Jump to content
SAU Community

Recommended Posts

Hey just my car from the compliance show and when they said it was in very good condition I believed just that, fact is i'm overseas at the moment so didn't have the chance to see the car to justify the condition. Anyway girlfriend just informed there are numerous scratches and dents as tho a car has scraped the whole driver side plus scratches all over the bonnet, boot, rear numberplate and god knows where else. From the detailed pictures I got from Japan it had to have been done in transit or at the compliance centre. Just need to know how to go about this, am obviously extremely pissed off at the moment and need advice. Its looking like a complete respray for a car that was in perfect condition before it left Japan.

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/
Share on other sites

Did you have shipping insurance?

If yes go through them. I had pics of the car sent to the insurers from the dock in Japan, and then once it got here just to cover my self. If you don't have pics and it's been in Aus for a few weeks it may be tough, but try it anyway.

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/#findComment-4086688
Share on other sites

Word of advice for anyone thinking of importing, be there for every part of the transportation process from the docks thru to compliancing to just before it leaves the compliancers. Due to me being overseas at the moment it will quite possibly affect the outcome with insurance for the damage done, not being able to follow it up quick enough.

Does suck big time not being able to do much but will definately be trying to sort it all out when i get back, will keep you updated on how it all goes.

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/#findComment-4105979
Share on other sites

Word of advice for anyone thinking of importing, be there for every part of the transportation process from the docks thru to compliancing to just before it leaves the compliancers. Due to me being overseas at the moment it will quite possibly affect the outcome with insurance for the damage done, not being able to follow it up quick enough.

Does suck big time not being able to do much but will definately be trying to sort it all out when i get back, will keep you updated on how it all goes.

Mate that is the risk factor you have to consider when you import cars , ive imported many cars let me tell you they dont always look like it the photos in saying that i imported some very clean ones. Did you import it yourself or an a Import agent in Australia ?

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/#findComment-4114217
Share on other sites

Yeh I did go thru an import agent, isn't the first time i've imported either so I knew the risks that came with importing. Biggest hassle is the photos taken before it left Japan were fine,with the marks I knew displayed on the pictures, problem being the scratches have suddenly appeared so i'm guessing it happened during transit somewhere, it only being aesthetic is a bonus as thats the only problem. Apart from a few minor things extremely happy with what I got.

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/#findComment-4114364
Share on other sites

  • 2 weeks later...
Hi,

Any update on your situation?? Just hope everything has worked out fine. I know the feeling when something like that goes wrong.

Thinking of importing a V35 but starting to think about buying one locally.

I was going to import. I chickened out and bought one locally. 99.9% go well from what I can see but i have the luck of the Irish or lack thereof.

Works a treat when it goes well but I didn't have the money to gamble on a slight chance it would go pear shaped.

I too hope that the situation here pans out for the good. Let us know mate.

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/#findComment-4154201
Share on other sites

Been stuffed around heaps trying to find out who knew anything about the scratches, at the moment it seems hopeless but do have a few contacts I can get in touch with at the gold coast who can do a repair for me. Found a few scratches on the wheels and just wondering if anyone knows of any good places to get them repaired (Brisbane/Gold coast area).

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/#findComment-4156053
Share on other sites

Mark,

To fix up your wheels, speak with Chris at Wheels Revolution, Slacks Creek.

Due to the color of the coupe wheels, its gonna set you back close to $200 per wheel to get the scratches removed and the whole wheel repainted to factory color.

Link to comment
https://www.sau.com.au/forums/topic/233018-trashed/#findComment-4156224
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...