Jump to content
SAU Community

Recommended Posts

You should have an adapter that goes onto the stock oil filter mount. Two lines come off it. If you have a remote oil filter, one line goes to it ( the short one), the longest goes to the cooler, and an inbetween goes from filter to the cooler.

If you dont have the remote oil filter, just adapter plate and two lines to the cooler.

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-499246
Share on other sites

on my trust kit i just bought. you have four lines.

two from the adapter to the remote oil filter, two from the remote oil filter to the oil cooler. this is because the remote oil filter housing has thermostats inside.

if your doesnt have thermostats inside. (not sure how to check) then earls make a oil thermostat. pm if you want the part number.

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-499456
Share on other sites

  • 7 months later...

Bringing up an old thread here, but when fitting a large oil cooler, do you need to increase the oil pressure to make it through this long extension of oil flow? will be at least an extra litre of oil going through the system too!

post some pics of the cooler for you guys, got a real bargain on it too!

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-760815
Share on other sites

i had no idea that the rotaries had a thermostat on the oil coolers that did that! is there any way to hook up an rx-7 cooler with the thermostat as being functional? im over in the states and climates vary alot so this wouldnt be bad.

EDIT: sidenote; whats the thread pattern and-length on an rb25det oil filter? i want to put the remote filter w/ oil cooler on but i need to know the pitch etc. to find a compatible one over here.

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-760816
Share on other sites

cheers for the info steve, do they have a shop front in silverwater?

also a couple more questions.

Do those of of you that run oil collers disconnect them and drain the oil out with oil changes?

Also has anyone noticed oil pressure drop after installing them?

Does anyone recommend having a thermostat in the setup?

thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765407
Share on other sites

1. Why do halhf a job

2.U would if u dont fill em up to compensate.

(anyone know how to do this, its got me stumped)

3.yes

yeah with the second question - oil pressure - i was assuming that it would be full including the oil cooler and lines!

still looking for info on how these thermostats work so this will obviously affect how the cooler is set up!

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765510
Share on other sites

yeah with the second question - oil pressure - i was assuming that it would be full including the oil cooler and lines!

still looking for info on how these thermostats work so this will obviously affect how the cooler is set up!

it is importand to have a thermostat in the setup as the cooler and lines usually takes an extra litre or so, this added capacity combined with freezing air over cooler can mean especially in winter that the oil either never comes up to temp or runs to cold for too long. the t/stat is cheap and in just run inline if you use the earls or motospecs item part no. (0555-331758) it is depending on supplier $113. be aware to never mount cooler with inlets/outlets facing down, and to use a filter with anti drain back valves in them if you intend to remote mount it. most filters do have this valve but some cheaper brands dont.

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765767
Share on other sites

thermostat is in sandwich block between oil filter and block. If engine oil temp is cold, oil bypasses lines and just circulates the filter, going back into the engine.

Same way thermostat works for cooling system. Now the big question is, how do u fill oil cooler system if a) oil is cold (thermostat is shut obviously), B) how do you know how much to put in?

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765890
Share on other sites

in line thermostat is an open valve that links 4 connections (two on each side with a thermostat that blocks off the middle when hot) - and is open when cold. this allows the system to remain pressurised at all times, so no chance of oil surge. Its a bit hard to describe without pictures and I dont have any.

As the oil gets hot the thermostat shuts which forces the oil to travel via the cooler.

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765989
Share on other sites

Hi guys, I have never used a thermostat on an oil cooler on any car anywhere in Australia.

Mine hasn't got a thermostat either, the oil gets up to temp quick enough

Mine is mounted behing my intercooler, between my radiator, and it seems to do a good job

Quick question, what is optimum temp for synthetic oil?

Link to comment
https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-766193
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...