Jump to content
SAU Community

Recommended Posts

Another very good one on the market is the AEM, im selling them around $100us cheaper than the innovate or PLX, sure there must be somone in Ausi selling them?

VEMS is also pretty good, not sure if you guys have VEMS agents there though, currently the AEM is slightly cheaper though.

yeah ive been using a aem gauge for nearly a year now, been perfect from day 1.

got it from quantum racing in qld

its got two..... and has full POWERFC support.

i use the LM1 for street tuning and in the race car and the LC1 for other things.

I use the LM1 connected directly to emanage or FC-datalogits for accurate wide band logging.

sorry must have been mistaken with another one.

whats the LC-1/LM-1 worth anyway?

  • 3 weeks later...

Innovate LC1 is the best option if you want to leave the sensor hard wired into your dump pipe. If you are just using it here and there, the LM1 (or its successor, the LM2), is the better option. The LC1 can be had for $260 - http://www.ausperformance.com.au/store/ind...mp;productId=21

The LM2 is a fair bit more expensive, at $620. Whilst I recommend this unit for people who only want to tune their cars every now and then, it isn't worth the money unless you are tuning other people's car's as well.

This isnt an area id be taking chances on over a few hundred $, esp if your going to be tuning with it. The innovative gear is proven many times over.

for ACCURATE tuning i wouldnt go past the autronic. there is a reason why its 2k.

but i use the ngk one. good for cleaning up the map on the road. if you do get one, make sure it has a 9-20:1 resolution with a linear 0-1v and a 0-5v aux output. as most ecus require this for exact afr targeting.

the ngk one does 9-16:1 :s found that out after i got it lol. but does the job i need it to do :D big red digits and a simple air cal. has never dropped cal once. and is .1afr away from the autronic one. :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
×
×
  • Create New...