Jump to content
SAU Community

Recommended Posts

Now that i finally have a SAFC II (thanks Bam)

The car went in this morning to xspeed to get sorted out.

hopefully i will be able to get rid of the blasted poping at 4.5K upwards and be able to give it fuul stick for once!:uh-huh:

the car went in with 165rwhp (filter, exhaust, BOV and bleed)

hanging out to see what i get out of it.

i cant wait

will let you know tomorrow

nate

Link to comment
https://www.sau.com.au/forums/topic/23451-the-car-goes-in-today-for-the-tune/
Share on other sites

xspeed know their stuff right?

(i hope im not vialating any business agreement here on the forums, its just a harmless question...)

you would have to admit though, that there are your good tuners and your bad tuners! we have all heard stories of what went wrong with the odd tuning job at whatever tuning shop.

well its back....

good news and bad

good:

im up to a 249wrhp!!!!!

i should probably put alittle of the explination in to the difference of dynos ie. the 1st figure of 165hp was from tim slakos dyno and the recent firgure of 249hp is from the gene exhausts one.

plus also i guess i also have extra 3psi boost now plus a safc tuned car now... im so wraped :D

bad:

the pop/miss is still there. it showed up on the dyno HUGE TIME!

isnt not as bad now.

i hoping that the plugs are just fowled from it running too rich for sooo long.

i will also have to check the coil packs too i guess.

anyone clued up on this proceedure?

it it the resistance between terminal a + c?

thanks guys

Nate

yeah sorry steve, i was going to head up your way for the install/tune. but at the moment it was just more convenient for me and others around me, to get it done close.

any chance i can rattle your brains on the weekend over the popping/ possible ignition problem matter?

Hmmm, 249hp seems lowish. I had 245hp with just upped boost via my blitz sbc, dump+front pipe and stock ecu with no safc. Though this was done on steve's dyno

man youre car is good

i had a similar flatspot/misfire etc problem and it ended up being a coil pack. if you can get your hands on a spare one just swap them in and out til you find the culprit. or maybe try the ignitor module...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...