Jump to content
SAU Community

Recommended Posts

Now that i finally have a SAFC II (thanks Bam)

The car went in this morning to xspeed to get sorted out.

hopefully i will be able to get rid of the blasted poping at 4.5K upwards and be able to give it fuul stick for once!:uh-huh:

the car went in with 165rwhp (filter, exhaust, BOV and bleed)

hanging out to see what i get out of it.

i cant wait

will let you know tomorrow

nate

Link to comment
https://www.sau.com.au/forums/topic/23451-the-car-goes-in-today-for-the-tune/
Share on other sites

xspeed know their stuff right?

(i hope im not vialating any business agreement here on the forums, its just a harmless question...)

you would have to admit though, that there are your good tuners and your bad tuners! we have all heard stories of what went wrong with the odd tuning job at whatever tuning shop.

well its back....

good news and bad

good:

im up to a 249wrhp!!!!!

i should probably put alittle of the explination in to the difference of dynos ie. the 1st figure of 165hp was from tim slakos dyno and the recent firgure of 249hp is from the gene exhausts one.

plus also i guess i also have extra 3psi boost now plus a safc tuned car now... im so wraped :D

bad:

the pop/miss is still there. it showed up on the dyno HUGE TIME!

isnt not as bad now.

i hoping that the plugs are just fowled from it running too rich for sooo long.

i will also have to check the coil packs too i guess.

anyone clued up on this proceedure?

it it the resistance between terminal a + c?

thanks guys

Nate

yeah sorry steve, i was going to head up your way for the install/tune. but at the moment it was just more convenient for me and others around me, to get it done close.

any chance i can rattle your brains on the weekend over the popping/ possible ignition problem matter?

Hmmm, 249hp seems lowish. I had 245hp with just upped boost via my blitz sbc, dump+front pipe and stock ecu with no safc. Though this was done on steve's dyno

man youre car is good

i had a similar flatspot/misfire etc problem and it ended up being a coil pack. if you can get your hands on a spare one just swap them in and out til you find the culprit. or maybe try the ignitor module...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...