Jump to content
SAU Community

Recommended Posts

Yep, you can fit a LSD to a R33, I fitted one to my R33 GTS25 a couple of months back made. The diff I got didn't come from a skyline, not quite sure what it came off (but it was nissan). Every thing was the same except the mounts at the back of the diff, I just changed the back plate over from my old diff and that fixed the problem.

Series 1 R33 don't have vvt, not so sure with the series II, I think they might have vvt.

Link to comment
https://www.sau.com.au/forums/topic/23472-lsd-and-cam-gears/#findComment-503140
Share on other sites

On-board model R32 GTS25 (ECR32) R33 GTS25 (ER33)

R33 GTS-4 (ENR33) R34 25GT (ER34)

R34 25GT-V (ER34)

R34 GT-FOUR (ENR34)

Engine type Water cooling serial 6 cylinders * DOHC

Cylinder

Inside diameter x distance mm 86.0×71.7

Entire aerodynamic volume displacement cc 2498

Compression ratio 10.0 10.0

The highest output

PS/rpm 190PS 190/6400

[ As for Type-S 200/6400 ] 200/6000

Largest torque

Kgm/rpm 23.5/4800 26.0/4000

Fuel feeder The NISSAN EGI (ECCS) electrically controlled gasoline injection device

Link to comment
https://www.sau.com.au/forums/topic/23472-lsd-and-cam-gears/#findComment-503856
Share on other sites

ok took the cam gear covers off

on exhaust side has a 5 spoke cam gear(not adjustable)

on the inlet side has large pice of steel with a cover bolted to it

wich apears to be bolted to the centre of the cam gear (all most same size as cam gear )this i guess is the vvt

please can some one tell me if i am correct

and also if you wanted to put adjustable cam gear on can this be taken off or is it the same thing

thanks eryc

Link to comment
https://www.sau.com.au/forums/topic/23472-lsd-and-cam-gears/#findComment-504173
Share on other sites

Originally posted by eryc

kyla there is no way you could find out what your diff is off? could you?

thanks eryc

Sorry dude, I've had no luck in finding out what it was off.:)

The ratio of the diff I got was 4:3.1 ratio LSD, but knowing what I know now, I should have got a 4:1.1 ratio LSD, it would have put the speedo readings out a little bit, but the car wouldn't rev quite so high at 100km, and I would have a better top speed, I'm kickin my self now:hellpisd:

If you are getting a LSD check what type of flanges (the ones from the diff to the wheels) you have, before you go and get one. I made the mistake of not checking the first time and got the wrong one:Oops:.

I have attached a quick sketch, of the diff flanges sort of looked like the first one in my case was the wrong one (can't quite remember if it was 5 or 6 stud), the 2nd was the one that fitted my car. sorry I can't be of more help.

Link to comment
https://www.sau.com.au/forums/topic/23472-lsd-and-cam-gears/#findComment-504325
Share on other sites

"7grand clutch dump, if both wheels spin u have an lsd if only one spins u dont have an lsd."

LOL yeah that's the fun way, the more restrained and kind way is to get the car on a hoist or jack it up and turn one (rear) wheel . if the other one turns then you have a LSD.

Link to comment
https://www.sau.com.au/forums/topic/23472-lsd-and-cam-gears/#findComment-504502
Share on other sites

can anyone tell me what is going on here: i have an lsd, but if i have one wheel on grass/dirt and one on tar and i go to take off, it just spins the wheel on the grass/dirt. i would have thought the lsd would have transferred the power to the wheel with traction (the one on the tar) and i would have taken off normally with no spinning??? or is that what a vicious (sp) LSD does? what the hell is a vicious LSD while we are on the topic of them? :)

Link to comment
https://www.sau.com.au/forums/topic/23472-lsd-and-cam-gears/#findComment-504554
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...