Jump to content
SAU Community

Recommended Posts

I think the rumours spark from this article...

attachment.php?postid=253771

In it, they go on about how the new "S16" Silvia will use the SR20VET from the X-Trail 2.0GT, with 280ps, and the XVL chassis.

They say it probably won`t be called the "S16", but the "V16" coz of the new chassis. This article came out mid-last year or so, and that pic is just the magazines guesstimations.

Link to comment
https://www.sau.com.au/forums/topic/23520-200sx-s16/#findComment-503597
Share on other sites

Its all heresay and conjecture.. there is no real S16 in design yet.. might be a few years before they come out too, if they do bother.

Japanese market is changing a fair amount in the types of cars they're producing.

no.. it wouldnt be an s13 with out an rb in it

or a skyline without a VQ35 .. :)

Link to comment
https://www.sau.com.au/forums/topic/23520-200sx-s16/#findComment-504070
Share on other sites

  • 11 months later...

Good point, but doesn't matter Nissan have used the same lettering but different numbers for different models before and I'm not talking about the same platform...like the Serena C24 and the Stagea C34. In case of same numbers WG C34 Stagea and GC C34 Laurel.

Another rumour had it's links looking similar to the next Sentra SE-R...so which would you prefer...a Q16 :P...

I've given up on guessing likewise for the next GT-R...best to wait and see.

edit: FYI...the above attachment is also very old photochop of a P12 Primera minus 2 doors, lowered and widened.

attachment.php?attachmentid=21075

Primera

NI_31_3_1097_front.JPG

Link to comment
https://www.sau.com.au/forums/topic/23520-200sx-s16/#findComment-983180
Share on other sites

  • 1 month later...
I think the rumours spark from this article...

attachment.php?postid=253771  

In it, they go on about how the new "S16" Silvia will use the SR20VET from the X-Trail 2.0GT, with 280ps, and the XVL chassis.

They say it probably won`t be called the "S16", but the "V16" coz of the new chassis. This article came out mid-last year or so, and that pic is just the magazines guesstimations.

SR20VET??? doesn't quite fit in right with Nissan's engine code scheme...unless theiy're dumping the DOHC and replacing it with something V which I have no idea of.

oh scrap that V is for the Neo VVL (variable valve lift)...

check this to read engine codes (Nissan) http://www.freshalloy.com/site/features/te...ome_codes.shtml

Link to comment
https://www.sau.com.au/forums/topic/23520-200sx-s16/#findComment-1021703
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...