Jump to content
SAU Community

Willall Racing Buys Australia's First Official Complied/street Registered R35gtr


Recommended Posts

  • Replies 271
  • Created
  • Last Reply

Top Posters In This Topic

Matt, not sure how well a high alcohol fuel would go in a car that is driven as often as yours isn't.

Alky loves the moisture.

Will, that's exactly what Shaun & I were talking about yesterday.

I've only just learnt that E85 exists - been hiding under a rock. It might be a case of switching between E85 and pump 98 tunes, I'm not sure. Example: in goes a tank of E85 for some fun, run it low, in goes a full tank of pump 98, switch tune over to 98, fuel system has mostly 98 in it and can sit in the shed till next time. It seems good in theory. Then again I could be way off - Martin would be the man to confirm that one.

Obviously the injectors need to have enough capacity to support the E85 and fuel pressure will need to be spot on etc.

One thing is sure, we'll certainly do a Martini 110 tune.

Drove the car yesterday and was able to use full throttle for the first time in about 2 years! It does in 3rd what it use to in 2nd. I like it.

I notice someone mentioned Skylines Downunder in this thread. Good old SDU. I can still recall registering on SDU when it had about 100 or so members - in about 1997 or thereabouts. Times have certainly changed!

Anyway back on topic; Can't wait to see what a tuned, exhaust upgrade, boost increase R35 GT-R can achieve on the drag strip. It's only a matter of time till people start run high 10's with a mild R35. Events like Targa West and Targa Tas are also going to be interesting as more R35's start popping up.

Ohh, didn't even know that! God, Nissan know what they're doing then hey. Way to destroy the hopes and dreams of others. No big single turbos for the new GTR's for a while then. :)

Was looking for that pic too Adam, yeah as you can see, one whole unit :(

to quote a certain new zealander seagull.... 'thts sht...'

-D

Nah won't take long at all for the tuning companies to make some T3 outlet style exhaust manifolds to bolt all the normal turbochargers to - I would be very surprised if someone hadn't made one already and has it in testing pending release for sale to the general public. Remember that the Yanks have grabbed onto marketing of the GTR and have already started throwing money at development - not to mention all of the decent Jap tuning houses have had one for 9+ months now.

the turbine clearly looks integrated but nothing stopping the compressor housing from being detached by the looks of things......don't know where your going to find a suitable replacement though. Like Andrew said, pretty soon you'll be able to replace that whole setup anyway.

Ohh, didn't even know that! God, Nissan know what they're doing then hey. Way to destroy the hopes and dreams of others. No big single turbos for the new GTR's for a while then. :closedeyes:

And you can only thank the good son of rajab above for that.

Hopefully this integrated approach will stop some of the general public turning these engines into laggy slovenly performers through the midrange with badly thought out turbo upgrades, which has been happening in the RB world for years. Amen :)

Ohh, didn't even know that! God, Nissan know what they're doing then hey. Way to destroy the hopes and dreams of others. No big single turbos for the new GTR's for a while then. :closedeyes:

Jarrad when they finally do come up with an aftermarket replacement for the 'V' engine (which they will), it will still be a dual setup, unlike the inline RB's

Jarrad when they finally do come up with an aftermarket replacement for the 'V' engine (which they will), it will still be a dual setup, unlike the inline RB's

Another way of looking at it.....

With the stock GTR IHI RHF55 turbochargers each good for around 35lb/min airflow with reasonable efficiency and using boost of around 1.4 bar,

The answer to a properly tuned stock power output would be close to 370 - 390kw at all four wheels without changing the turbines.

Now, correct me if I am wrong here, but that would be more power than 99.9% of most Skyline owners would ever get close to having, or even possibly dreaming about. Nissan should be thanked for using such capable turbochargers on these engines in the first place. They make even the 34N1 turbochargers look like jelly wristed pea shooters in comparison :closedeyes:

Edited by Martin Donnon
Another way of looking at it.....

With the stock GTR IHI RHF55 turbochargers each good for around 35lb/min airflow with reasonable efficiency and using boost of around 1.4 bar,

The answer to a properly tuned stock power output would be close to 370 - 390kw at all four wheels without changing the turbines.

Now, correct me if I am wrong here, but that would be more power than 99.9% of most Skyline owners would ever get close to having, or even possibly dreaming about. Nissan should be thanked for using such capable turbochargers on these engines in the first place. They make even the 34N1 turbochargers look like jelly wristed pea shooters in comparison :closedeyes:

thats a good way of looking at it.... and a good analysis of the 34n1 turbos lol...thats decent power for sure.

Edited by Ryanrb25
thats a good way of looking at it.... and a good analysis of the 34n1 turbos lol...thats decent power for sure.

Look its a forum, anyone can have an opinion - but heres the facts....

R35 GTR Stock

0-100km/h - 3.5 sec

0-400M - 11.5/11.6sec @ 120-122mph

Now to get this pace from an R32/33/34 GTR you will need -

TD05 kit/GT2540 turbochargers or similar running 1.5 bar boost

700cc+ fuel injectors

Upgraded fuel pump

Programmable management FC or similar with a correctly carried out tune

Front pipes

Full exhaust system with cat removal

Upgraded twin/triple clutch

Possible intercooler upgrade

and be prepared to build an engine for it in the very near future...

as well as being in a constantly harrassed and defectable car :closedeyes:

This isnt a guess. We have done our fair share of GTR modification over the years.

Nissan have done a very good job of building a genuine supercar that thankfully DOESNT need a bucket of cash thrown at it to make it go like it should.

That is the true value of R35 :)

Edited by Martin Donnon

Having said that the rb is late 80's technology and i believe it did very well to last this long....time to step aside i think, although the R35 is yet to be proven 100%. Time will tell...i have complete faith.

Edited by Ryanrb25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...