Jump to content
SAU Community

Recommended Posts

Hey,

Ill be installing a GT2530 soon into my r32 but the turbo doesnt come with any water/oil lines or drain pipe.

Is it possible to use the stock lines/drain pipe etc from the standard rb20 turbo?

Is this advised, or should I get some new lines made up by Pirtek/Enzed?

If its better to get new lines, how exactly do i order a set for my car and the turbo?

Would they happen to have any information on the r32, and all i would need to bring is the 2530 for them to measure up the banjo bolts etc?

I have no clue on how to do this, any help would be awesome :O

Thanks

Patrick

Link to comment
https://www.sau.com.au/forums/topic/236172-gt2530-oilwater-lines/
Share on other sites

The 2530 should go straight onto the stock stuff without a problem

Stock lines are the best thing for the job, strong and last the distance.

^^ eat that patrick!

haha awesome, thanks for clarifying that Ash :O

Next time i should learn to trust you more Abu, but then again you do own a r33 <3

lol i take it this carried over from the wasteland? :yes:

hehe over msn, but i prefer to have it in writing on sau as its easier to point the finger if it doesnt fit :O

Although being admin/mod you can always delete your response ;)

Blame Ash if it doesn't fit, I just agreed with him :O

I can't be liable for MSN conversations!!

but seriously it should all bolt up fine, if your using the stock oil drain from you turbo you won't even need a new return hose but maybe change it anyways as they crack sometimes when removing

Not fail and fail at all.

They are strong, and durable. As long as you dont go bending them (why on earth you'd bend metal piping like that logically is beyond me)

After market ones are a waste of money. Ive had them before but only because i had too. If there was a way to use stock metal lines, i'd have done that no question

Are you people sure that the std R32 oil and water lines are straight fit for a Garrett ball bearing turbo ?

All Garrett GT25 based ball bearing turbos (GT2554R - GT3582R) use GT25 sized unions from memory , I thought the Hitachi's used on RB20 and RB25's were different - larger water fittings like T3 water cooled eg VLT T3 .

The thing is that these GT25 based BB cartridges are more compact in the bearing housing than Hitachi's so as you would expect they tend to use smaller unions .

You may want to search for pics of plumbing bits HKS supplied if you bought their GT2530 turbo as a bolt on "kit" .

A bit of homework here saves frustration later , cheers A .

hmmm well this has turned around quickly.

Good thing the turbo is still on its way from japan :banana:

So if i need new water/oil lines, would a kit like this suit the car+turbo?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=150296969010

6af6_1.JPG

  • 2 weeks later...

I had a rb20 turbo and have now got a hks gt2540 and they are different fittings all round. The oil drain has smaller bolt flange, the water lines are the same size on each side for the inlet and outlet. The oil feed is like a 14mm. They are BSP fittings so getting them from enzed and the like are good but they won't have anything for the oil drain.

A kit like you have shown would be good but if you are using a "GT25,28" turbo then you want that kind of kit. Not the T3 T4 turbo fitting kit. Not sure if they are the same or not but I would probably say no.

Looking at the kit that same group from ebay have for the T25 t28 turbo they dont have a oil drain flange for the turbo so i dont know how they expect you to fit that.

Just remember Garrett turbos have different fittings.

Just look around. I spent prob $150 on all my lines and fittings. I didnt go the whole bling bling factor of the braided line as its not really that good. I got Blue R9 High Temp Hose. A bit cheaper than braided but entirely up to the person.

Good luck

Edited by Dongaz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...