Jump to content
SAU Community

Recommended Posts

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I got kei-office 8KG/6KG... their pretty good, would reccomend them but make sure you get the damper adjustment tool with them, cos you cant change the damper in the rear with out it..

Edited by DemsA31

Hey mate

My friend bought ISC coilovers for his 4dr 32 and is very happy with results.

He has spent a lot of money on ISC branded products and never has issues.

ATM i have king springs and will be definitely looking to get ISC coilovers in the future.

$1500 for the set isnt to much of a bite out the wallet for good results. :dry:

http://www.isc-coilovers.com/

here is the site go check it out.

Ryan is based in Adelaide

Non N1- "This coilover is currently only available for S13/S14/S15, Mazda FC and WRX. It is basically the same spec as our N1 coilover except this model comes without pillowball/camper tops on the front coilovers. Instead the cambere top is replaced with a non adjustable strut top. Camber on the front can still be adjusted via an enlongated hole in the bottom bracket."

Quick question... how do u know when your coil overs have shat themselves???

cuz mine are bumpy as anything... kinda giving me the shits now

came with the car from japan... they are blue but no idea wot brand they are

i know they are adjustables if that helps..

ISC N1 coilovers = $1499. These are 32 step damper adjustable and unlike alot of the "jap" ones ISC are base height adjustable. The difference between the ISC N1 and the basics is the front pillowballs, the N1's have them and the basics do not. Pillowballs are there for better steering response allowing the top of the strut to move around when cornering etc. ISC coilovers are SA based and we pride ourselves on our customer service!

If anyone has any questions please don't hesitate to throw me a pm,Ryan

Edited by ISC-Performance
Quick question... how do u know when your coil overs have shat themselves???

cuz mine are bumpy as anything... kinda giving me the shits now

came with the car from japan... they are blue but no idea wot brand they are

i know they are adjustables if that helps..

The most common blue coilover to come out of japan would be Cusco. Have you checked for leaks etc? Could also be worn pillowballs at the top of the strut, siezed shock etc.

Ryan

I'm pretty sure my springs are 5kg/4kg...gonna see If I can dig up my original receipts...

that'll be good if you can find out.

My Bilsteins are 400lb (7kg) at the front & 450lb (8kg) at the rear.

I wouldn't mind going a bit softer on the rears though, maybe 5 or 6kg.

I was just talking to Matt (SK's son) who said that is way too stiff Luke. They recommend about 5 or 6 on the front and 4 or 5 on the rear with heavy sway bars to compensate........unless your vehicle is mainly used for track.

Spoke to Polyair Suspension in Sydney today, who are very knowledgeable about damping rates, and they said that even though Jap stuff have either 16 or 32 steps of adjustment, the difference between the softest setting and the hardest is not as great as a European shocker with only 9 settings..........go figure?!

ISC N1 coilovers = $1499. These are 32 step damper adjustable and unlike alot of the "jap" ones ISC are base height adjustable. The difference between the ISC N1 and the basics is the front pillowballs, the N1's have them and the basics do not. Pillowballs are there for better steering response allowing the top of the strut to move around when cornering etc. ISC coilovers are SA based and we pride ourselves on our customer service!

If anyone has any questions please don't hesitate to throw me a pm,Ryan

i can personally vouch for Ryans customer service :down:

yeah Luke we need GTR front sway bars you may also need GTR rear but for me its GTSt in the rear

it was my understanding the ISC only do the N1 here no point doing the cheapies

have tein hr in mine with 35mm cusco sway bars. depending on the rd they can be harsh but generally they are good. no body roll but yet the way they are set there is still plenty of movement for general driving.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...