Jump to content
SAU Community

Recommended Posts

Hey guys, just wanted to find out peoples opinion on the HKS GT-rs bolt on kit for R34 GT-t (rb25det, neo)

Has anyone got any dyno sheets? rebroad minded females and supporting mods

Also, would like to get a rundown on the highest output, low mount turbo's for the RB25 (direct replacement) e.g greddy/trust, garret

I've got plans to make approx. 300rwkws but don't know what turbo to buy (all i know is that i would like to keep the car as standard looking as possible)

hence the low mount option.

Don't know whether i should go internal or external gated aswell

Help muchly appreciated, couldn't find any info in search

Link to comment
https://www.sau.com.au/forums/topic/236578-gt-rs-kit-on-r34-gt-t/
Share on other sites

Did you try searching? With "GT-RS" & "GTRS" ???

There are about 3 or maybe 4 BIG GT-RS dedicated threads now.

If you dont search, and read those, then your missing a lot of key information.

One being 300rwkw is not going to happen

I got an Internal wastegated HKS 3037 low mounted, and it sounds like the turbo you are after. It sits pretty snug down between the manifold and the suspension tower :(

i got about 250RWKW @ 15psi, it runs as rich as hell, I only get about 270Km's(if I'm lucky) to a full tank. I would like to up the boost to 18psi and get a retune to get somewhere up around the 280RWKW mark.... But thats when the credit card gets paid off...

But I think 300RWKW would be easily achieved with some minor engine work , like cams.

In no way is a gtrs going to give you 300rwkw, besides its really pushing the internals of an unopened engine. My advice ring shaun at Boostwork at edwardstown, 82990621, just got him to fit a new turbo to my 34, making 284rwkw and 410nm @ 17psi with not much lag where the 3037 will have even more. If your after a number then get the 3037 but if u want huge midrange and little bit less end power figure get his garret turbo, its bolton and looks standard as. The exhaust is now holding it back.

<br />In no way is a gtrs going to give you 300rwkw, besides its really pushing the internals of an unopened engine. My advice ring shaun at Boostwork at edwardstown, 82990621, just got him to fit a new turbo to my 34, making 284rwkw and 410nm @ 17psi with not much lag where the 3037 will have even more. If your after a number then get the 3037 but if u want huge midrange and little bit less end power figure get his garret turbo, its bolton and looks standard as. The exhaust is now holding it back.<br />
<br /><br /><br />

Dude, im pretty sure he's talking about the HKS 3037.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...