Jump to content
SAU Community

Hid Group Buy $120 Delivered


NYTSKY
 Share

Recommended Posts

Installed the 4300k H4 kit on my 32GTR (N1 headlight) and it work pretty good. The color is white with no hint of blue. Plug and play, so its nice and easy.

Like all HIDs such as these, putting them in halogen reflector housing will cause them to glare if no glare guard is included, these ones do come with a glare shield, but I recommend wrappping it with aluminum foil to cover up the bottom hole and wrap it slightly over the side.

I have a good cut off point now. :-)

Link to comment
Share on other sites

hay interested in the 12000k h4 ones for an 32 just wanted to know what is your turn around after payment is recieved?also are they completly legal?what should i leave as a reference? also please send me your bank details.

thanks

Turn around after payment is 5-10 days depending where you live.

HIDs are not legal,unless you have projectors standard, though i have had a few kits over the years and i have never been defected for them.

12000k is really blue i i would not recommend them for everyday driving, most people who buy kits over 8000k use them for show use only.

Please leave your SAU user name as reference,

PM sent.

Link to comment
Share on other sites

Installed the 4300k H4 kit on my 32GTR (N1 headlight) and it work pretty good. The color is white with no hint of blue. Plug and play, so its nice and easy.

Like all HIDs such as these, putting them in halogen reflector housing will cause them to glare if no glare guard is included, these ones do come with a glare shield, but I recommend wrappping it with aluminum foil to cover up the bottom hole and wrap it slightly over the side.

I have a good cut off point now. :-)

Cheers mate glad you like the kit. :P

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...