Jump to content
SAU Community

Eastern Creek Track Day: Friday 31st October


Recommended Posts

Date: 31st October 2008

Venue: Eastern Creek

Cost: $250 ($200 if we get 50 cars)

Passengers: Allowed (and free)

Organised by: Terry Thompson

[email protected]

http://www.councilofmotorclubs.org.au

ECIR has been booked for a private day on Friday 31st October. Main aim is for the Production Sports Association to have an end of year event to thank their supporters.

There will be spare spots available and we need to get the numbers to break even on the day.

So all types of car are welcome.

If openwheelers turn up we will have to make separate groups.

Otherwise you will be able to go out when and as you like.

No 20 minutes on then 60 minutes off as in ARDC days.

Passenger rides are permitted so a chance to thank those who have helped.

Also an ideal day to sort out a car as there will be no lost time between tweaks to forget what it was like.

Seat belts and helmets / clothing to Supersprint requirements for Drivers and passengers.

L2S license as a minimum for Drivers.

Road cars to Supersprint standards also so effectively as they are.

We will have an Ambulance and a couple of recovery vehicles but no flaggies, just spotters with radios.

No limit on visitors and passengers, They will sign a form if going out but no charge for them.

Garages and pit lane available.

Gourmet sandwich lunch, tea, coffee, soft drinks available for $15 head. BYO after drinks if needed.

I need numbers of people taking part in that lunch.

Costs, Well , we have to cover the ARDC bill which is close to $10K so if we get 40 cars that’s $250 /car or if we get to what I think is the maximum for a clear go then 50 cars = $200 each.

We will initially ask for the $250 then refund on the day if we get the 50 cars.

I need an indication of who might be coming ASAP as we need to be sure we can cover the bill.

Please feel free to send this email on to anyone you think is suitable for such a day.

I will be Clerk of Course so I can assure you of the minimum of rules to make it a great day.

The entry form is attached and most details are on it.

I will have some indemnity forms at the track on the day so each driver will complete one, present their CAMS license and collect an armband to show the controller as you approach pit exit.

Passengers will fill in a similar form and collect a different coloured armband. They will also show this as the car exits pit lane.

Entry_form_31st_October.pdf

Edited by Kero
  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Fatz and I are going

This is not organised by me. Just thought a few might be interested. Also if they get a total of 50 drivers the price drops to $200.

I believe there only a few spots left so it will almost certainly be $200 for the day.

Edited by Kero

Yeah $95 bux for a cams license for the year.

This day would probably not be suitable for anyone who has not done a club track day before.

Also be prepared for about $200 worth of fuel. These open days you can easily do 100's of laps which is tough on the car.

Either way its a steal for $200 and a good excuse to take a day off work.

I did a day a couple years ago on OP South with Aaron McGill and his race team. They took their sponsers out and he had an invite to other guys, and I was one. I was on the track with about 5 V8 lites....at first I was scared but after a while you can hear them coming and just know to get out of their way haha

I already have the friday off - Will see how I go with funds

anyone had much experience in one of these days? it sounds like it would get a bit sloppy...with all those cars out there.

Come down for a free joy ride.

You find that at the start of the day you have alot of cars on the track. A few hours in there are hardly any cars on the track.

$200 Bargin! I will try and get a spot last minute and hope to god its forecast to rain!!!!!

Old school flash back 2002, $199 motor concept days, Oz and Fatz rain dance for a week to have the heaven’s open up. 3 tanks of fuel and 200 laps later fatz and oz have just torn up the best skid pan in the world by ourselves!

$200 Bargin! I will try and get a spot last minute and hope to god its forecast to rain!!!!!

Old school flash back 2002, $199 motor concept days, Oz and Fatz rain dance for a week to have the heaven’s open up. 3 tanks of fuel and 200 laps later fatz and oz have just torn up the best skid pan in the world by ourselves!

that was the farken best track day i have ever been to

rain + open track day

farken good times

Fatz,

Almost as good as the fathersday L2S day when some idiot lost his load just before lunch, 4 schooners later we are back on the track doing our best lap times of the day.

No cash has left my hands yet, Need some stuff done to the car and watching for the weather, I wont run at a 30Deg + day.

Bonks, will pop out at a minimum, but I am planning to drive.




  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...