Jump to content
SAU Community

Recommended Posts

I'm looking for a Staffy pup. If you know anyone with a litter, or have pups yourself, please let me know.

I'm in Bexley (15 mins out of the CBD).

I'm looking for:

- English Staffordshire Bull Terrier (not American Staffy / Pit Bull / or any such cross)

- Tan (red)

- Male

- About 8 weeks old

- Preferably Vet Checked, Vaccinated, Wormed, and MicroChipped (as they should be by that age)

- Not overly expensive. I dont need papers, pure blood lines etc. It will be a family pet.

eg. :D

StaffordshirBullTerrierpup.jpg

Edited by Munkyb0y
Link to comment
https://www.sau.com.au/forums/topic/238301-staffy-pup-wanted/
Share on other sites

Thanks Shell :)

i've been looking on all the sites etc. no luck so far. most are too far or too expensive. ive looked at a couple, but i wasnt convinced they were proper english staffies. not to mention, the dodgy owners turned me off.

so i thought i'd also post here for good measure. will keep looking till i find the right one.

Edited by Munkyb0y

Yeah lots of dodgys out there :D

I hope you find the perfect pup...it's worth taking the time to find the right one like you're doing :)

one thing I will say about the price though... even though you dont care about papers, I would still buy from a proper registered breeder, which will cost you a bit more. But I think it's worth it for the peace of mind that they know what they're doing and have bred 2 dogs together that don't have health problems etc.

I don't know what price range you're looking at, but even a rescue puppy like this StaffyX is $350... so good breeders would be charging a fair bit more than that..

approx 18months ago a friend paid 1500$ for a pedigree best of the litter show standard Stafford. I have seen pure for 700-1200, i personally would just be checking the RSPCA website regularly, they have them every now and then, pure's included!

ahhh soon to move to a new house and going to start looking for a british bulldog pup!

can anyone help haha?

If you want a good dog have a look at the Aussie Bulldog.

Breed from the british but with all the problems removed.

They are also a lot cheaper.....

Here is a photo of mine after a swim in the river.

post-52768-1222948554_thumb.jpg

If you want a good dog have a look at the Aussie Bulldog.

Breed from the british but with all the problems removed.

They are also a lot cheaper.....

Here is a photo of mine after a swim in the river.

thanks for the suggestion. but i think we are going to go with a tan/red staffy pup as well

Hahaha fluffy got owned!!! Cute dogs.

Could you PM me the details please? Just in case it comes to the point of a Dubbo road trip :( Thanks

maybe a dubbo road trip since i'm looking for a tan/red staffy pup as well

but i still got a couple of weeks before i move and prepare the home for a puppy so hopefully something closer pops up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...