Jump to content
SAU Community

Recommended Posts

Hey guys, picked up a R33 gts-t to drop the motor into my 32, so the rest of the car is up for grabs. Bonnet, headlights, reo bar and radiator were damaged but everything else is fine!

Motor/loom/ECU not for sale

Front calipers - sold

floor mats - sold

instrument cluster - sold

5 speed manual conversion for R33, R34. Box has about 145,000ks, good condition- no crunching or funny noises.

Conversion includes clutch, flywheel, box, tailshaft, master cylinder, slave cylinder + lines, shifter, pedals and gear surround - $1800 negotiable

Set of HR racing 17x7" wheels and tyres. Tyres are almost brand new- just over 5000ks old. Will fit any skyline, s14, s15 etc without spacers

includes wheel nuts + lock nut set

post-35556-1222768934_thumb.jpg

Sideskirts & rear pods, great condition - $150 pickup only!

post-35556-1222770382_thumb.jpg

Aftermarket stuff:

Boss kit for aftermarket steering wheel - $40

Splitfire boost gauge: 30inHg / 20psi - $50

Apexi BOV with r32/r33 adaptor - $100

GFB boost T - $20

Apexi power intake filter - $50?

Greddy turbo timer - $50? Works well, but has some sticky shit left on the top from where it was taped to the underside of the dash

post-35556-1222770586_thumb.jpg post-35556-1222770477_thumb.jpg post-35556-1222770544_thumb.jpg post-35556-1222771272_thumb.jpg post-35556-1222770644_thumb.jpg

R33 power steering pump - $100

R33 alternator - $80

R33 a/c compressor - $60

Stock cat - $50

Washer bottle - $20

Radiator overflow bottle - $20

Charcoal canister - $30

Stock suspension - springs/shocks - $180 full set ono

Front lower control arms - $70 ea

Front upper control arms - $40 ea

Steering rack - $120

Front hubs - $70 ea

Castor rods - $60 pair

Rear lower control arms - $60

Rear 5 stud hubs - $160 pair

Handbrake assembly + cables - $160 pair

Manual diff - $150

Driveshafts $60 pair

Rear upper arms - $50 full set

rear calipers - $150 pair

Rear rotors, good meat left - $50

post-35556-1222771298_thumb.jpg post-35556-1222771887_thumb.jpg post-35556-1222771948_thumb.jpg post-35556-1222771993_thumb.jpg

Drivers door window switch (s1) - $80

Drivers door motor - $80

Passenger door motor - $50

Dash surround (large) $80

Under dash piece (near fuse box) $30

Heater core - $80

Din pocket - $25

Ashtray - $30

Front seats, good condition, some wear on the drivers seat in usual spot but its not too bad - $150

Seatbelt full set - $50 (will seperate)

Ignition barrel + door barrels + key - $100

post-35556-1222770782_thumb.jpg post-35556-1222770823_thumb.jpg post-35556-1222770905_thumb.jpg post-35556-1222771132_thumb.jpg

post-35556-1222771753_thumb.jpg post-35556-1222771797_thumb.jpg

Also have some other spares:

Full set of R33 s2 door trims front and rear - $100 for the lot

post-35556-1222770126_thumb.jpg

R32 turbo elbow - $40

post-35556-1222771841_thumb.jpg

R33 passenger side door - white - missing just the side mirror and lock barrel - $100

post-35556-1222771702_thumb.jpg post-35556-1222771718_thumb.jpg

R33 S2 bootlid / spoiler - $150 pickup only thanks!

post-35556-1222772081_thumb.jpg

If youre after any other little part swing me a PM and i'll probably have it. Can also get pics of pretty much everything upon request, PM me!

Can post anything here or pickup is from near rockdale in sydney

Cheers

Link to comment
https://www.sau.com.au/forums/topic/238317-wrecking-gray-r33-gts-t-in-sydney/
Share on other sites

PM Sent, thanks. :/

Replied

have you still got the turbo timer.?

Yep still have the timer, Pm me if interested

Dude ! Have you got a seat belt extension arm for either side ? The one that extendeds the seat belt forward at the top mounting point.

Sorry mate this car didn't have them

Hey, would you be willing to sell me just 1 rear hub? a thread on my rear right is completely shafted...

Sorry mate, looking to sell em as a pair at the moment

u got a left front splashguard by any chance?

Sorry mate don't have that bit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...