Jump to content
SAU Community

Recommended Posts

I'm looking at upgrading the injectors on 33gtr as stock ones are maxed , spoken to different shops and get different advise, one says hks 640's but that means have to get hks feul rail also $$$$$ and they say sard 700 aren't very good, because they are twin spray and over feul when you put your foot down ,with big puf of smoke out back.. but seems to me lots have them ,, anyone experience this and what about economy ,, I curently get about 350 to a tank..

btw only after about 420-450 awhp

Link to comment
https://www.sau.com.au/forums/topic/238503-injectors-upgrade/
Share on other sites

Nismo 600cc's should do the job, they are a straight drop in and you don't need to modify the fuel rail.

I also believe that they have 3 or 4 tiny spray nozzles which distributes the fuel better, as a finer mist leading to a more efficient combustion.

Edited by GTR-PWR
You can pick then up new for much cheaper than that buddy, try nengun.com or http://www.greenline.jp/ delivery takes a bit longer but it's worth it if you can hold out :P

holy s##t what a gold mine .. thanks heaps for that....for those prices I might as well get nismo

now I don't have to get robbed locally

cheers

I'm guessing you have an aftermarket ECU.

Why not get an aftermarket adjustable FPR, and bump the fuel pressure a few psi?

yes have dejetro

No body's mentioned FPR to me , just told I need to upgrade injectors... What is FPR etc

and yeah I've sent a question about those prices.. 1 or 6 ??

fpr is much cheeper than new injectors if u only need a little more and u can simply increase the fuel across the hole tune but winding some pressure in

but if big power u chasing then injectors it is

ok just read a few things about feul pressure regulators

If getting an adjustable FPR and upping the pressure is sufficient why does everyone change injectors ??

injectors are at 90 -- 95% at the moment

fpr is much cheeper than new injectors if u only need a little more and u can simply increase the fuel across the hole tune but winding some pressure in

but if big power u chasing then injectors it is

running 380 awhp with injectors 90 -- 95% looking to go for up to 450 awhp certianly not mre than that....

do you think thats poss. with just FPR upgrade

thoes prices per injector?

yip those prices are per injector....

am still going to get a set of nismo probly 600's uncase I decide to turn it up some more...

thanks guys for the info,, just goes to show its worth asking around and not just taking the word of one shop..

and nismoid they were the ones doing the work on my car ----- from now on I'll be doing my own researth.........cheers :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...