Jump to content
SAU Community

Recommended Posts

i need to find one single second hand wheel of the volk challenge wheels (as seen previously on leewahs car) but instead of the blue its got red, i have the oppertuntity to buy a set of 18" volks for $700! only thing is one wheel is buckled (front) but otherwise the rest are damn fine.

i wanna buy second hand as new would be to much for me

they came off a gtst so they fit already, i think i need tyres but doesnt matter, the wheels are cheap!

please guys help me out as soon as possible

Link to comment
https://www.sau.com.au/forums/topic/23854-help-me-find/
Share on other sites

well its a front one, and apparently the rears are verrry wide, yet it was off an r33 gtst, so he's bringing one front and one rear to work tomorrow, see if it fits, and even if i have to buy a brand spanka from takakaira or something i will still have leet wheels, but if i can find one second hand one then yippee

they are silver with red, instead of blue like daves

Link to comment
https://www.sau.com.au/forums/topic/23854-help-me-find/#findComment-510628
Share on other sites

I bought a set of second hand wheels for my R30 - 2 had been damage, like run flat, badly pitted around the tyre seal.

The guy I got them from managed to get them fixed - said he didn't believe they were the same wheels when he picked them up.

I don't know where they were done (somewhere in Heidelberg) - see the guys at Beaurepaires in Bayswater and ask them about the RS Impul wheels.

Link to comment
https://www.sau.com.au/forums/topic/23854-help-me-find/#findComment-511587
Share on other sites

hmmm yeah i am going to see them tomorrow and hopeully i can find someone to fix the buckled one up because i really cant be bothered buying a new wheel from japan and also paying that amount, but will if i have to

Link to comment
https://www.sau.com.au/forums/topic/23854-help-me-find/#findComment-512172
Share on other sites

nah i was gonna buy one from takakaira, and donallens can get them apparently (checked their site) but i want to see how badly this wheel is damaged (hopefully he brings them to work tomorrow) so i know if i can fix it or just have to replace

cant wait :P:)

Link to comment
https://www.sau.com.au/forums/topic/23854-help-me-find/#findComment-512873
Share on other sites

yep they advertise per wheel

i tried the rear wheel on my car

GOD DAMN IT LOOKS AWESOME!

its silver with red instead of blue like leewah's

i love them

rear's have 275's PZero's

fronts i forgot

only thing is the front buckled wheel

he's gonna bring it to work tomorrow, gonna take it to tyrepower (who helped me out a lot today, wheel nuts were threaded, he took them off for me, sold me new ones for cheap, and also a set of locknuts for $10 :) :)) get them to see how buckled it is, if its fixable then i'll take it this guy in heidelberg he recomended (maybe same guy u were talking about blind-elk?)

if it cant be fixed then i will be sad but wont be to upset

the $700 price tag was per wheel, i didnt hear properly, but he said $1500 for me :):P with tyres

i hope this can be fixed, they look awesome, i think the rears are 18x9 or 9.5!

its crazy!

front might be 18x7 or 8 hehe

Link to comment
https://www.sau.com.au/forums/topic/23854-help-me-find/#findComment-514057
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...