Jump to content
SAU Community

Recommended Posts

Hey, does this include the price for purchasing the product.

If so you are looking at $2000 for the plug in microtech for the R33. I have one of these and it works great. If you need some advise om me. I could also rfer you to the guys that did mine. (if your in melb).

The LT-12 microtech is also cheaper but not the plug in version.

Cheers.

syndey kid, how hard are autronics to install and tune. The self learning package that is?

They are roughly the same price as a new power fc.

And you chuck away the airflow metre, which is always a good thing! Save up to $300 for the z32 one that you dont need.

have you had any experience with the autronic self learning packages on the rb25dets. Good results? Have had a rough price of around $2500 installed and tuned.

cheers

Sorry bolf, that post didn't answer your question.

Bin a while since I used an Autronic, on the BMW SuperTourer. The Motec self learn is more recent use for me and they are similar in execution. Self learning is great if you have a fast and wide lambda sensor, but they cost $2K on their own. Trying to tune using a narrow and slow lambda sensor ($300) is a waste of time. The self learn software was about $800'ish if I remember rightly, the whole M8 Pro package was around $5K, so that sounds right.

I recommend a lot of Motec self learn systems for guys with no easy access to dynos, expensive but works brilliantly. We tuned a car in 2 laps at Bathurst a couple of years ago, just drove it around. Took it back to the dyno I could barely squeeze a few horsepower out of it despite a couple of hours of trying. Damn accurate, better than many tuners I have seen.

Hope that helps

my mistake around $1700 + install/tune. which was roughly $700.

Is it true that the autronic and the nissan coils, can be a bit of a hassel? It may be an involved ecu, but that can be a good thing, giving more options, functions, and settings to control. In the right hands i think it could work well.

just need to know how compatable they are to a rb25det motor...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...