Jump to content
SAU Community

Well Defected Again, Dosnt Look Good This Time..

Fugi

By Fugi,
in General Maintenance

 Share

Recommended Posts

Fugi Community Regular

Fugi

Posted
Posted

Well as much as i love my car iv apparently done something wrong to the cops, defecting me for the second time in less then 2 years.. Pay rego for it to sit in the garage collecting dust..

Well here is the sitcho. Well i got defected where else but chapel st, but befor you say u stupid c*** asif do chapel laps.. i wasnt, i live near there and i was goin to rebel sport at like 3pm during day.

ok so here is the damage:

Parcel shelf - inspect for structural integrity(previous owner cut holes for 6x9's)

Bumper Bar - inspect for structural integrity

Pod or intercooler, not both.

Windscreen - to be inspected

Tyre placard - to be fitted

So i got my stock airbox and windscreen has nothing wrong with it, think he just felt like writing more that day. But the big problem im having is "Inspect for structural integrity" went to the mechanics today and the guy said i have to get engineers to have a look at it :P... well just wanted to know if this is correct and if it is dose anyone know were and how much this is going to cost me???

Thanks for reading

R33_Dude Rising Star

R33_Dude

Posted
Posted

I had to get checked for structural integrity when my car was being repaired.

Its not a big deal really, cost me $100 and an hour of my time. Brought the car to the engineer along with photos of the repair project, he looked at the chassis and a few other things and signed a piece of paper.

R33_Dude Rising Star

R33_Dude

Posted
Posted
did you repair it your self?? or did you have the engineer repair it??

Repaired by my old man and uncle and then taken to the engineer for approval. Actual cost was $138.40. Took four hours from an accredited workshop. No big deal really.

UWISSH! Grand Master

UWISSH!

Posted
Posted

dude being defected for the second time in less than 2 years is not alot, i would call that being pretty lucky.

try being defected 2 times in 3 weeks!!!!

and as for what u wer defected for, they are no major problems, wen u start getting sent for epa emmisions tests then u know u got a problem

joel234 Rookie

joel234

Posted
Posted

lol my old datto got 13 defects and i didnt even let them get under the bonnet to see the 230hp z18et in there lol

:D

list goes :

exaust

too low

no interior

aftermarket gauges

battery not secured (in boot)

no spare tyre

front mount

no parkers

only one seat (drivers)

to loud

bald tyres

non standard wheels

hole in trans tunnel ... had rb20 gearbox so had to cut shifter hole

full roll cage

locked diff

some people get all the luck lol

Fugi Community Regular

Fugi

Posted
  • Author
Posted
dude being defected for the second time in less than 2 years is not alot, i would call that being pretty lucky.

try being defected 2 times in 3 weeks!!!!

and as for what u wer defected for, they are no major problems, wen u start getting sent for epa emmisions tests then u know u got a problem

damm 2 times in 3 weeks yea i would be priddy pissed if that happend.. Its just that after spending all this money keeping the car on the road never have anything for mods..

thanks for making me feel abit better though :D lol

blind_elk Grand Master

blind_elk

Posted
Posted
ahh thanks heaps for that, called daniel up and booked it in for Tuesday for him to take a look. Hopefully he can do something about it and dosnt cost me an arm or a leg.

Thanks again

So how did it go? Or aren't you talking to me LOL ?
  • 1 month later...
Fugi Community Regular

Fugi

Posted
  • Author
Posted (edited)
So how did it go? Or aren't you talking to me LOL ?

sorry mate, well not much has happened atm, tried to get it towed there but racv wouldn't let me.. So me and daniel agreed on me sending him some pics of the parcel shelf.. He even offered to drive down to my house to have a look.. ***top bloke** But i have been really busy atm so havent got around to it..

Lost my license till December 22nd so its not a top priorety atm.. but hoping to sort it out next week..

post-24404-1227538274_thumb.jpgpost-24404-1227538322_thumb.jpg

post-24404-1227538335_thumb.jpgpost-24404-1227538347_thumb.jpg

post-24404-1227538362_thumb.jpg

thought i might chuck up the pics, just so people can see what happens when you get your speakers installed by autobahn.. lol :P

thankyou for everyone that helped

will hopefully be able to post up "cars back on the road" in a couple of weeks :)

Edited by Fugi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...