Jump to content
SAU Community

Recommended Posts

Well as much as i love my car iv apparently done something wrong to the cops, defecting me for the second time in less then 2 years.. Pay rego for it to sit in the garage collecting dust..

Well here is the sitcho. Well i got defected where else but chapel st, but befor you say u stupid c*** asif do chapel laps.. i wasnt, i live near there and i was goin to rebel sport at like 3pm during day.

ok so here is the damage:

Parcel shelf - inspect for structural integrity(previous owner cut holes for 6x9's)

Bumper Bar - inspect for structural integrity

Pod or intercooler, not both.

Windscreen - to be inspected

Tyre placard - to be fitted

So i got my stock airbox and windscreen has nothing wrong with it, think he just felt like writing more that day. But the big problem im having is "Inspect for structural integrity" went to the mechanics today and the guy said i have to get engineers to have a look at it :P... well just wanted to know if this is correct and if it is dose anyone know were and how much this is going to cost me???

Thanks for reading

I had to get checked for structural integrity when my car was being repaired.

Its not a big deal really, cost me $100 and an hour of my time. Brought the car to the engineer along with photos of the repair project, he looked at the chassis and a few other things and signed a piece of paper.

did you repair it your self?? or did you have the engineer repair it??

Repaired by my old man and uncle and then taken to the engineer for approval. Actual cost was $138.40. Took four hours from an accredited workshop. No big deal really.

dude being defected for the second time in less than 2 years is not alot, i would call that being pretty lucky.

try being defected 2 times in 3 weeks!!!!

and as for what u wer defected for, they are no major problems, wen u start getting sent for epa emmisions tests then u know u got a problem

lol my old datto got 13 defects and i didnt even let them get under the bonnet to see the 230hp z18et in there lol

:D

list goes :

exaust

too low

no interior

aftermarket gauges

battery not secured (in boot)

no spare tyre

front mount

no parkers

only one seat (drivers)

to loud

bald tyres

non standard wheels

hole in trans tunnel ... had rb20 gearbox so had to cut shifter hole

full roll cage

locked diff

some people get all the luck lol

dude being defected for the second time in less than 2 years is not alot, i would call that being pretty lucky.

try being defected 2 times in 3 weeks!!!!

and as for what u wer defected for, they are no major problems, wen u start getting sent for epa emmisions tests then u know u got a problem

damm 2 times in 3 weeks yea i would be priddy pissed if that happend.. Its just that after spending all this money keeping the car on the road never have anything for mods..

thanks for making me feel abit better though :D lol

ahh thanks heaps for that, called daniel up and booked it in for Tuesday for him to take a look. Hopefully he can do something about it and dosnt cost me an arm or a leg.

Thanks again

So how did it go? Or aren't you talking to me LOL ?
  • 1 month later...
So how did it go? Or aren't you talking to me LOL ?

sorry mate, well not much has happened atm, tried to get it towed there but racv wouldn't let me.. So me and daniel agreed on me sending him some pics of the parcel shelf.. He even offered to drive down to my house to have a look.. ***top bloke** But i have been really busy atm so havent got around to it..

Lost my license till December 22nd so its not a top priorety atm.. but hoping to sort it out next week..

post-24404-1227538274_thumb.jpgpost-24404-1227538322_thumb.jpg

post-24404-1227538335_thumb.jpgpost-24404-1227538347_thumb.jpg

post-24404-1227538362_thumb.jpg

thought i might chuck up the pics, just so people can see what happens when you get your speakers installed by autobahn.. lol :P

thankyou for everyone that helped

will hopefully be able to post up "cars back on the road" in a couple of weeks :)

Edited by Fugi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...