Jump to content
SAU Community

Final Banner Choice  

32 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

The only thing I would like to suggest for Banner 1: Is to make the "A.C.T" part of it white rather than red as to make it a little more balanced and stand out.

- Actually... Maybe not, as it makes it stand out too much.

:)

Edited by Ecstasy

comment on No. 1

I would like to see a mock up with the Skyline in solid white (with or without a red outline), leaving ACT as red and again with ACT as white. In saying that, I may still stick with the original, but would still like to see some mock ups before deciding. My reasoning is that I would like the banner to be clear from a distance.

To be honest, I like them all, but in particular like the tacho image.

I would like to see a mock up with the Skyline in solid white (with or without a red outline), leaving ACT as red and again with ACT as white.

agreed

I voted for 1, but I do like the others but not with that R34 with the weird wing, and if we are not going to go ahead with a photoshoot of another R34 as was offered by Xmetal then I'll go for no.1. :ermm:

Just some outside feedback, that hasn't been mentioned.

Have the "SKLINESAUSTRALIA" in white outline, with the middle "SAU" section filled in red.

You are also missing a "." in "A.C.T.", after the "T". Otherwise just drop all the ".'s" and have "ACT"

I too prefer the 1st banner btw :ermm:

ay Paul,

Mate, buddy, pal

If you do ever do a photoshoot for it, would i pleease be able to come along, the Nurs are my favorite model of line and they are quite hard to ever see get ahold of, so yeah im always looking for opputunities to have a look at them etc,

cheers mate

alex

Everyone we have a problem, one I alluded to at the start of this process. The image is far for being large enougth.

Here's the response from the place I was getting quotes from:

price will be $350 + tax

this image is not large enough , the max you MIGHT get is 1m long.

You have sent a Bitmap file if you know someone with illustrator or COREL

tell them to trace it and send as a VECTOR (outline) file.

or we can trace it for $165-.

If you want the Highlight effect over the speedo this will increase the cost dramatically.

we could do something similar in illustrator without any extra cost.

The price just keeps going up with every month we wait. If we want them to fix it up it will cost $566.50 in total. We are far from this total with only $370 + some cents.

If someone can provide an upscalled image that might help eg 5,000* 2000 minium size. Else we go back to Mick's flag pole and add that nurspec R34 someone said they can get a shot of.

I can probably fix it up, but i'm not quick.

I can't believe how much it costs now, where are you going? The R31 Skyline Club sign you guys might have seen last year was only $200 inc tax. He said it didn't matter how many colours, but we only had White and Blue.

Edited by StinkyPoo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...