Jump to content
SAU Community

Recommended Posts

As topic suggests, i'm looking for an underseat subwoofer for my R33.

Don't want to go all out and put a sub in the boot as i'm pretty much stripping out the whole car of all unnecessary weight.

I've got 6.5" splits at the front and 6x9's at the back. They both go hard, but i'm just missing that lower frequency band. I don't want a thumping hard sub that will blow my ears off but something that will complete the whole range of frequencies.

Where can I get them from?

Quality? Has anybody used/heard these in person?

I've come accross these just to put things in perspective of what i'm looking for.

Thanks in advance!

RJ

Link to comment
https://www.sau.com.au/forums/topic/239810-underseat-subwoofers/
Share on other sites

Focal make a good subwoofer they are more into sound qual then bass depth so thy have all the frequecies without makin it feel like ure sittin on a vibrator. the best is to go in and have a listen see what you like fow yourself, also it will b hard to fit a sub under a seat due to the depth of a sub the further away the sub is from ureslf the better quality =]

when you strip the interior its easy to mount a sub behind the actual seat

lol @ your username

Yeh pretty much everything is stripped outta my car ie: rear seats, Boot lining, spare tyre, sound deadening..bla bla..

lol @ your sig..

Focal make a good subwoofer they are more into sound qual then bass depth so thy have all the frequecies without makin it feel like ure sittin on a vibrator. the best is to go in and have a listen see what you like fow yourself, also it will b hard to fit a sub under a seat due to the depth of a sub the further away the sub is from ureslf the better quality =]

Focal..yeh they are pretty good.

There's enough room for an underseat sub. Or right behind the seats..

I know bout how low frequencies need more room to sound better. Thanks for the help dude.

people will probably disagree with me here, but if you dont want to much base, then dont bother with any sub. Just purchase a couple splits for up front and decent 6x9s for the rear, run them off a half decent amp and the system will be sweet as a nut.

Probably be cheaper that way as well.

This would probably be a good time for me to jump in.

JB Hifi sell something by QMax called invisibass. SQ is excellet. It is an active under the seat 6" woofer. It is suprisingly bassy. I've had one of those before (in my wagon support car and people hae been suprised when they opened up my boot and not found a 10/12 inch with massive box).

The Clarion unit is ok, but that ryda price is expensive.

The invissibass is about $279 at JB Retail. The last one I had was bought for $239.

Jaycar also have a response active sub. They are running them out. Currently $99 trade price. I've got one of those in my wagon.

Unfortunately someone stole my invissibass so I bought the response as a cheaper option.

The response does do a good job at filling in the lower end frequencies if you want some bass, but it is not as good as the invisibass. The reponse doesn't go anywhere near as loud. As you turn it up, it distorts pretty quickly and makes a 'poooof' noise. Whereas the invisibass would absolutely crank.

Another option you might consider is amplified 6x9 inch subs. I've installed those into someone else's car before and have also had good results

Good bass, as MANWHORE said. Go with that.

But just for a normal cruiser man, 4 channel amp or 5 channel Response amp from Jaycar should do u the trick.

5 Channel Jaycar

set of splits or decent 6.5 coaxials in the front

good set of 6x9's in the back..

and one invisibass seat sub.

All wired to the 5 channel.

It will give you some good tunes :)

Good bass, as MANWHORE said. Go with that.

But just for a normal cruiser man, 4 channel amp or 5 channel Response amp from Jaycar should do u the trick.

5 Channel Jaycar

set of splits or decent 6.5 coaxials in the front

good set of 6x9's in the back..

and one invisibass seat sub.

All wired to the 5 channel.

It will give you some good tunes :banana:

Yesh..i like..a lot!

Thanks guys.

Yeh, i've got splits at the front, the new Pioneer Kevlars..they pump.

Also got 6x9's in the back, customised rear board..just fit in with the large magnet,had to fit them long ways...end to end facing front and rear of the car.

Invisibass..from JB hi-fi...will like to see these.

Do these have a built in Amp? as i only have a 4 channel Amp @ the moment.

Thanks for the help guys.

MANWHORE...i'm assuming you had an R33 to fit these under.

Unfortunately, these were not in my skyline, but they are/were in my wagon.

In terms of sound, it should sound better in the skyline since the cabin is smaller (the wagon has that whole massive rear section.

The jaycar unit is really cute and does fit under the skyline seat. People are actually suprised when I show them the size of the unit itself.

The invissibass is physically bigger. because it has a much better enclosure. I have not tried it under my skyline seat and I can't try it for you because some prick thought it would work better in his car than mine and stole it!

Yes - they're active - built in amp.

Just one thing i'd point out though. The invissibass does produce quite a lot of bass + the sound is relatively good.

BUT, it is not going to be crazily loud. If you're looking for a sub that will shake the whole neighbourhood, then this is probably not for you. If you were to jump outside of the car with the doors closed, you won't hear much.

That is exactly how I like it - enough for me, not for the rest of the world outside.

Edited by MANWHORE
I had always thought underseat subs were for female pleasure only...

Oh..perfect.

Never thought of that idea.

I'll put it under the passenger seat for my misses.

What an ideas man..she'll love me for it!

And to MANWHORE. I agree, keep the sound inside not outside.

I'm the type of guy that goes for performance rather than looks.

Cheers for all the help guys.

I'l be busy this weekend at my nearest JB store in search/order for these Invisibass Subs.

RJ

  • Haha 1

Hahaha, thats gold lols.

My 2 subs in the back, with just al il bit of bass boost .. car vibrates like crazy lols .. your hair starts feeling funny on your head lols.

Anyways, post up some pics when you get it done man.

MRXTCZ

My 2 subs in the back, with just al il bit of bass boost .. car vibrates like crazy lols .. your hair starts feeling funny on your head lols.

ye u can make seats shake without underneath car seats subs :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...