Jump to content
SAU Community

Recommended Posts

You might have to work your guards to achieve this look, most panel beaters can do this.

You'll need a chat with couple of panel beater and go from there.

Hope it helps.

Cheers

Grant

You might have to work your guards to achieve this look, most panel beaters can do this.

You'll need a chat with couple of panel beater and go from there.

Hope it helps.

Cheers

Grant

Yeah I'm aware of that. I just want some more pics and ideas.

Yeah I'm aware of that. I just want some more pics and ideas.

Alright, maybe try looking at nissansilvia.com forums, pretty sure these guys do this kind of thing to their cars quite often.

hey Kevzilla. great idea moulding STI front guard sections onto your rear quarters. did you cut away the metal from the existing guard that would have been underneath?? how did you clean this up to make it look all smooth inside??

also it looks like you have a GTR front bar but you said your front guards were standard and you just pulled them out a bit.... how did you mount the front bar? looks original too with the plastic bottom lip??

Yer with both front and rear i cut away some of the existing metal because having rims wide enough to fill the guards they will rub against the standard body. The front bar is a genuine GTR with plastic lip...pulling the guards out a bit made the bar sit ok. only problem now is there's a gap between the headlights and the bar because for some reason the gtst guards and bonnet seem to be shorter than the GTR ones.

  • 3 weeks later...

This is what I ended up getting done.

It's about 1 inch wider at the back and front was a bit less. It's plenty though for the GTR offset (+30) rims and fatter rubber. The paint did crack however so they needed to be touched up.

Pics aren't the best.

post-10715-1233644883_thumb.jpg

post-10715-1233645030_thumb.jpg

  • 2 months later...

Has anyone bought any rear guard flares from Topstage on their R33? I am thinking of getting some done by Topstage but would like to see some results please... many thanks...

r32-skyline-boltons.jpg

Anyone have any idea where I can get bolt ons like these?

u can get some like them i think from tokage on the gold coast ... think they look very similar, they really look good n 32s..

i was thinking guys instead of pricey sti guards why not go to a wreckers n just get honda legend guards

hey munkey i've had topstage do my whole kit, guards and all. couldn't be happier with the work!

but i dont have pics on this laptop i'm on currently. pm me tomorrow and remind me or i'll forget to come back here as i dont get on much anymore.

cheers,

shane

hey munkey i've had topstage do my whole kit, guards and all. couldn't be happier with the work!

but i dont have pics on this laptop i'm on currently. pm me tomorrow and remind me or i'll forget to come back here as i dont get on much anymore.

cheers,

shane

Hi Shane,

Thanks for that mate... I am so looking forward to getting them done but pictures would be super.

I will PM you now. Thanks again, buddy.

sorry for the late reply: firstly, try this

http://www.skylinesaustralia.com/forums/Wi...02#entry4135202

i've uploaded a couple of pics there. i've also included another pic i found of the guards in progress, and also some pics of freddy from topstage at work.

Freddy's design ideas and creativity are amazing. i told him what i wanted, i showed him some pics of some idea cars, and he/we came out with a rough draft of what you see below. There was another final draft after this one that i signed off on and we started working with, but that's just an example for you.

The guards I don't even remember getting done now, it was so long ago and there was so much work going on with my ride that i don't remember how long he took with them. I know the front guards were extremely quick, and he smoothed out the indicator lights seemlessly and waited for after painting to do the grill, but i'm sure you can work this out with him. As for the rear guards, this was a lot of work! the amount of hours of labour that went into them was crazy, but the end result is amazing. it's fibreglass over the metal shell, so i've strengthened my car up with strut bars front and rear and never once has any of the fibreglassing cracked. I guess some things did take some time, but with another daily car it never mattered so i didn't notice.

The best thing about Topstage and Freddy is he is honest and helpful! I've had 3 front bars proir to this custom one and his quality is 100 times better than any previous bar. The costs involved were very competitive, as mentioned i tried 3 previous places and searched the net for days before deciding on topstage. if you wanna see my car at any time, or any specific questions please buzz me anytime.

cheers,

shane

p.s. if your guards are too wide your wheel offset may look a little silly. i've got 4 sets of spacers, the fronts are on all the time but the rears i no longer use due to the tires rubbing because the car sits low. if you want the pair, we can work something out.

post-44524-1239681190_thumb.jpg

post-44524-1239681202_thumb.jpg

post-44524-1239681239_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...