Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Nismo twin plate coppermix. I have the competition model which is rated a little higher with the Nismo Slave cylinder. I will NEVER change it for something else. It's behind a 400 rwkw 2.8 litre. Cant recommend it highly enough.

I have the same clutch, competition type as well, but for a gtst. It's actually called Super Coppermix-C

Interesting you have used the Nismo slave cylinder as it specifies not to be used on twin plate clutches. I was about to order it myself, but decided against it after reading about the warning and inquiring about it.

I got a quote of $1089 for the JB special. But after seeing what happened to Benm's car (flywheel exploded and wrecked the car) id rather go for a more expensive (and better to drive IMO) clutch that includes the flywheel

Also checkout NPC clutches, I should have my rebuilt clutch back from them this weekend.

I've heard there twin's are very good but expensive, ~2300, not so sure about the singles, haven't heard that much about them, there was a group buy on them on this forum not long ago....

Also checkout NPC clutches, I should have my rebuilt clutch back from them this weekend.

I've heard there twin's are very good but expensive, ~2300, not so sure about the singles, haven't heard that much about them, there was a group buy on them on this forum not long ago....

can u pm me details plz. phone # ect.

thanks

http://www.npcperformance.com.au/page/npc_twin_plate.html

2200 or thereabouts for a brand new twin plate is good value when you know it will never give you grief. The added benefit of NPC is they are very cheap to have rebuilt (should you ever want to sell it as a brand new clutch).

May be a little overkill for your application though.

I have to agree.. send Dan at ERD an email [email protected]

Dan and NPC have put together quite a few wicked clutches for me with flywheels for great prices!

and by far shit all over those jim berry's after seeing noel's explode and finding out he doesnt use the antiburst covers which is a must in my opinion for anything modified.

One word....Jim Berry

Thats 2 words :)

Bang for bucks go Jim Berry..with the current exchange rate the twin plate Nismo copper mix will cost twice that of Jims...lol

If you want BANG for your $$$ go JB

If you want a quality option with an anti burst cover that wont cause collateral damage @ a reasonable price contact Elite Racing

i got even better bang for my buck.

called up NPC today and ordered a custom clutch off them that will hold 350-370 awk. smooth to drive too i was guaranteed :P

As if that line hasn't been used before :P

Oh well, hope it works as well as they "guarantee"; if it doesn't what happens and who pays for the labour to remove and refit another clutch?

NPC does custom clutches like Jim Berry, they also do rebuilds, I got a pre-supercopper mix twin plate clutch rebuilt for $680, so if you get your hands on a worn clutch, just get a rebuild if you can't afford a brand new clutch (depending on condition of course).

I'd recommend NPC, the clutch feels very good so far but I won't know for sure until its worn in and I test it out properly :(

welllllllll......... after 2 weeks of this clutch something decided to go pop today whilst putting the hammer down. I cant get my car into gear. lets see what the prob is.

basically i went to snap 2nd gear and i heard a small clunk noise. then i couldnt get it into gear after that. But when the car is off i can put it into gear.

if i turn the car on whilst in gear and pressing the clutch the car goes to take off. faulty clutch or workmanship? i dont know. But i am definately pissed off right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...