Jump to content
SAU Community

Recommended Posts

Hey guys im luke not new here but just got my r32 gtst well got it about 8 months ago but just got some decent photos of it so thought i might put them up for you guys to check it out, nothing special atm just pretty much standard apart from the usuall fmic, exhaust, cam gears, 12psi.... goes pretty well stays side by side with a s15 with same mods so not too bad for the old rb20 (its done 227,000 k's !!!!!) only prob so far is that it leaks through sun roof and some through the passenger side footwell.... no one will touch sunroofs apparently so if anybody know off a good place in brisbane can you let me know thanks? well here it is hope you like...

P.s back is not that high just looks it cause of the way it sitting the other wheel is up in the guard nearlly lol

post-22722-1224411587_thumb.jpg

post-22722-1224411779_thumb.jpg

post-22722-1224411942_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/240835-my-skyline/
Share on other sites

Hey guys im luke not new here but just got my r32 gtst well got it about 8 months ago but just got some decent photos of it so thought i might put them up for you guys to check it out, nothing special atm just pretty much standard apart from the usuall fmic, exhaust, cam gears, 12psi.... goes pretty well stays side by side with a s15 with same mods so not too bad for the old rb20 (its done 227,000 k's !!!!!) only prob so far is that it leaks through sun roof and some through the passenger side footwell.... no one will touch sunroofs apparently so if anybody know off a good place in brisbane can you let me know thanks? well here it is hope you like...

P.s back is not that high just looks it cause of the way it sitting the other wheel is up in the guard nearlly lol

The sunroof rubber is apart of the glass section and the rubber cannot be bought/replaced. I had a pretty bad leaking one in one of my R32’s in the past. There really isn’t a solution; you might find an auto trimmer who could have an idea on something to keep the roof watertight for the time being however.

The glass/rubber unit from Nissan is about $1500 pending what Nissan dealer ship you call and whether you no someone in parts. The roof is really easy to pull out, so it’s all DIY.

Car looks clean though, bring it along to SCC08!

http://www.skylinesaustralia.com/forums/Sk...20-t238760.html

Link to comment
https://www.sau.com.au/forums/topic/240835-my-skyline/#findComment-4205758
Share on other sites

lol yeah there the usuall! :wacko: thanks for the info about the sunroof but that can wait not like it gets driven in the rain (sits at home undercover got ute as daily) Nismo Boy sounds like a good day to bring the missus and my little boy out, will have a chat with her and see... thanks for looking guys!

Link to comment
https://www.sau.com.au/forums/topic/240835-my-skyline/#findComment-4209670
Share on other sites

sorry mate forgot cant go wisdom teeth get taken out on the 14th all 4 of them yay......

Snap. That sounds way more fun than the SCC, you get to be doped up for a weeks straight afterwards. haha. Btw, awesome looking 32 man.

Link to comment
https://www.sau.com.au/forums/topic/240835-my-skyline/#findComment-4217170
Share on other sites

yeh thats wat i thought

i took it off my s13 without problems

but apparently the 32's have double sided tapes to them plus the bolts.

i dont want to rip the paint so i left it on atm

plus my car is pretty high atm on stock suspensions

the spoiler draws attention away from it :thumbsup:

lol soon wen i lower it lik 4-5cm ill take the spoiler off and itll look nice

i bought my car last week from this dude in sunnybank aswell

Link to comment
https://www.sau.com.au/forums/topic/240835-my-skyline/#findComment-4221448
Share on other sites

IMG_0163.jpg

except i have a spoiler on mine which i cant get off

did u get urs with the spoiler and taken off urself or u bought it already removed?

i swear i was the first person to have one of these muffs...now everyone has one :) they are good.

though doesn't quite my car down enough now. new exhaust going on mine on the 5th w00t!!

yeh thats wat i thought

i took it off my s13 without problems

but apparently the 32's have double sided tapes to them plus the bolts.

i dont want to rip the paint so i left it on atm

plus my car is pretty high atm on stock suspensions

the spoiler draws attention away from it :)

lol soon wen i lower it lik 4-5cm ill take the spoiler off and itll look nice

i bought my car last week from this dude in sunnybank aswell

hmm yeah they have tape and rubber in there as well and 3 bolts. I got the holes welded when i got the paint redone.

Link to comment
https://www.sau.com.au/forums/topic/240835-my-skyline/#findComment-4225379
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...