Jump to content
SAU Community

Recommended Posts

hey guys.. i just bot my r33 shipped over from victoria. its a pretty sleek looking car. (pics attached)

just about to take the car over the pits tomorrow.

just need some advice from any1 that is willing to give me a hand :thumbsup:

just want to know if the following mods will fail the inspection

turbosmart plumback valve, (legal)

turbo timer

tein adjustable coilovers

there is a 450 hp turbo

apexi boost controller

pod filter (secured and covered)

intercooler

just a few things that i'm concerned about. would any1 be able to tell me if the guys at the pits mite reject the car??

thanks guys :)

post-54657-1225121299_thumb.jpg

post-54657-1225121310_thumb.jpg

post-54657-1225121324_thumb.jpg

post-54657-1225121456_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/242033-need-help-with-car-inspection-r33/
Share on other sites

All of that should be ok, but I don't think your bonnet will pass. You're not supposed to have reverse facing vents. They reckon if there is oil flying up and it comes out the vents it will be all over your windscreen and you can't see lol. Just take it over as is and see what they say.

All of that should be ok, but I don't think your bonnet will pass. You're not supposed to have reverse facing vents. They reckon if there is oil flying up and it comes out the vents it will be all over your windscreen and you can't see lol. Just take it over as is and see what they say.

lolz.. mite screw on the protector thing under the hood before taking it there.. i heard turbo-timers were illegal because it keeps the engine running after the driver has left the car. is that correct??

I've heard that too, but I'm not sure what the pits say. It may be that you can have them but you can't leave your car while its running or something stupid. Just see what they say I guess.

Just see what they say I guess.

hehe thats what i'm afraid of. worst case scenario i mite have to take out all the mods and just take it over inspection again. hope it doesnt come to that! :thumbsup:

ya 33s had the battery behind the rear seats

that bonnet will most certainly fail

turbo timers are fine as ive never had problems with any of my cars going through

make sure the car has a "self arming" immoboliser as you will require one

coilovers is a bit iffy, some pass some dont

just take it over, get a list of what needs to be done

everyone makes it sound like a anal rape but its really just another inspection/test

good luck!

Depends on what Teins you have.

If they are like superstreet where only the spring seat is height adjustable they may pass it. If its like flex which is double height adjustable they wont pass it.

If i can help you with the suspension at all, just let me know :)

Cheers

Depends on what Teins you have.

If they are like superstreet where only the spring seat is height adjustable they may pass it. If its like flex which is double height adjustable they wont pass it.

If i can help you with the suspension at all, just let me know ;)

Cheers

Off topic.. but CUTE BUNNY! :)

You will need an immobiliser, eastern states cars aren't required to have one, so chances are you don't have one in there yet. So go get one.

If the car is low, it shouldn't be too big of a deal, mine only has 15cm of clearance at the tip of the front bumber and they passed mine without any issues.

Make sure all of your wipers, lights, safety equipment works.

To save you some hassle, just unplug your turbo timer or set it top not have a countdown.

Hide your boost controller away if possible, it shouldn't be a problem, but best to play it safe.

Minimum clearance is 150mm from the lowest part under your car.. I don't think that includes side skirts but it does include exhaust as far as I know.

Required by law is 100mm clearance from the lowest point of the car (sideskirts, bumpers, exhaust or whatever). The only thing that doesnt get included is flexible mud flaps. If they are a solid mud guard such as late model falcons etc these get included.

Also the law states that this clearance is to be had with half a tank of fuel and ALL seating positions filled.

Hope that helps.

Oh and this Avatar was given to me by a Mod of SAUWA....i could change it, but said person will just change it again LOL....that aside, please take my above comments seriously LOL

also

-your tail lights will be illegal.

-Your alloy pedals will be

- and your tint looks pretty black.

Alll really depends on the inspector you get and the pit you go to. As mentioned best to just go over and see what they list.

Depends on what Teins you have.

If they are like superstreet where only the spring seat is height adjustable they may pass it. If its like flex which is double height adjustable they wont pass it.

If i can help you with the suspension at all, just let me know :D

Cheers

thanks for the offer :P appreciate that!..

so this is what happened today.. i took the car as is today first thing in the morning.

wasnt a shock when it failed inspection. surprisingly it wasnt that bad!. the dude wanted me to take the bov (its legal) but the guy wanted me to take it off. the car was too low so that went on the sheet as well. and had to remove the racing pedals. lolz. i took out the pedals, went to a nearby workshop ("kyp" not the friendliest lol) and put in a stock bov. didnt have time to raise suspensions so we tried our luck and maxed out the tyres. the clearance was well above 100mm. i'd say it was atleast 125mm. took it over the pits again and then the guy puts a rod under the car and says that its still low coz the exhaust system is hanging too low. :P .

so i had to run to a friend's work shop (evolution r). the dude took out my exhaust and put a cannon on. now the car will definetly pass but the car is alot more noisy. dont know whats going to happen there. if they say that the car is too noisy, i'm just going to say that its always been like that and i just adjust increased the height using the coilovers. hopefully i can get away with it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...