Jump to content
SAU Community

Recommended Posts

Hey guys,

i dont know about your car's though mine was suffering from major brake dust to the front wheels, i would polish them one day, and 2 days later BRAKE DUST!!

Well a few weeks ago i started using the auto glym alloy wheel seal..... i thought to myself most likely wouldnt work.... just more bullcrap from the shelf..

Believe it or not... IT WORKS!!! no more brake dust builds up on my wheels...!! its abit pricey $20 for the bottle... but worth the money!

Link to comment
https://www.sau.com.au/forums/topic/242159-how-to-stop-brake-dust/
Share on other sites

goody ill give it a go, the brake dust is a bloody nightmare on 350GT's

http://www.4wheelplay.co.uk/autoglym-alloy...eal-p-2090.html

It seems like a wheel polish that dosnt let brake dust stick to the rims

http://www.vektools.com.au/autoglym-alloy-...eal-p-3027.html

here is a link to a shop who sells it... i bought my bottle from Repco...

honestly this stuff works! it takes about 3 to 4 weeks before i get a slight dust build....and thats a slight dust build which i cn hardly see....

its a spray that you spray onto your alloy wheel.. and you simply polish it off with a rag....

perfect for all types of alloy wheels... Auto glym is not classified as a cheap product so yes it will be fine with those expensive jap wheels!

+ 1 fantastic stuff; used it on my beema as they have terrible brake dust issues.

basically i removed each wheel one at a time and washed them thoughly (inside and out) with dishwashing detergent.

Dried the wheel and sprayed a nice liberal coat on....waited 30mins and applied a second coat before putting the wheel back on the car.

Process was repeated with other wheels; basically a high pressure hose at the local carwash would remove most of the brakedust and every now and then i would give my wheels a wash with car shampoo.....no need to scrub as the dust just comes off.

I've been using a wheel wax.

I will give giving this stuff a go. A spray would be much easier to use than having to wax on, wax off.

Tried NON acidic wheel cleaner? Spray on, leave it on for a few minutes, and hose off. Sparkeles the wheels, cleans off any crap build up. But you still should use a 2nd sponge to take off remaining residue. Then I would suggest applying this brake dust repellent product.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...