Jump to content
SAU Community

Recommended Posts

HI All ,

my car is a r34 GTT

hopefully you guys will be able to provide some insight to this issue for me.

ok i went to the shops before car started fine with no issues drove fine no issues.

but when i came back from getting some milk unlocked my car , turned the key nothing at all could hear the fuel , no starter motor nosie , no clicks , ticks motor not turning over?

all electronics are working battery is only a week and abit old , i also tried to jump starting it , no luck :)

thought possible my immobilizer was not disengaging , but i was able to push start it with no issues.

able to drive home car was running good. i went to try to start it again after i got home , NO LUCK same thing again turn the key nothing but the electronics and fuel ?

any help or ideas would be great

thank you kurtis

Link to comment
https://www.sau.com.au/forums/topic/242578-starting-issues-r34-gtt/
Share on other sites

A common problem amongst old car's is that the starter motor doesnt work when engine is hot.

"he heat generated in the starter by the engine and the exhaust pipes (sometimes) causes the armature to expand. If the bearings are worn then the armature drags (actually contacts) on the stator causing a short circuit and a high friction drag. Sometimes just replacing the bearings can fix the problem. "

Although your car is quite new, im having doubts that it could be the starter motor?

See if the problem only occurs once the engine is hot? Best to take down to an auto electrician and ask for a free alternator/starter motor/battery check-up. :ninja:

  • 10 years later...
On 10/30/2008 at 11:22 PM, KURTIS34 said:

HI All ,

my car is a r34 GTT

hopefully you guys will be able to provide some insight to this issue for me.

ok i went to the shops before car started fine with no issues drove fine no issues.

but when i came back from getting some milk unlocked my car , turned the key nothing at all could hear the fuel , no starter motor nosie , no clicks , ticks motor not turning over?

all electronics are working battery is only a week and abit old , i also tried to jump starting it , no luck :)

thought possible my immobilizer was not disengaging , but i was able to push start it with no issues.

able to drive home car was running good. i went to try to start it again after i got home , NO LUCK same thing again turn the key nothing but the electronics and fuel ?

any help or ideas would be great

thank you kurtis

Was this ever resolved? I am having the exact same issue in my r34 gt right now.. I drove it perfect this morning to the shops. Got back in and nothing when I turned the key. 

Try to start it with a 50c piece direct onto the solenoid terminal from the main cable (at the starter motor itself).  If it will crank there, then you have a problem with wiring between there and the ignition switch.  If it won't, give it a whack with a soft face hammer or a lump of wood and see if it will crank after that.  If it will, then the solenoid is sticky, which probably means full of clutch dust, but it could just be warm.  Finally, they can get grumpy when hot, when they get old.  If it works when it cools down, then there's your answer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...