Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

in all seriousness i wouldnt bother spending money on the gtst. i have owned one series 2 with auto trans and it just doesnt do it for me no matter how much money you put into it. if you are still into the modding worldgame then get the gtr. you get the rb26, the twins, the awd, fatter ass and the badge. ive gone the opposite and have bought and evo, its a really fast, reliable car with nearly all the features of the gtr but not as hight of tuning potential as gtr.

although ive only had the car for a day im already thinking that ive made the wrong choice and ill be trading/buying a v35 in next couple days.

Too get your GTSt up to a good level (what I'd consider a good level at-least) you're going to be looking at:

Manual Conversion - $1500 (+ HD clutch etc - $1000)

New ECU - $1500

Fuel Pump + Injectors - $1000

HKS GT-RS (or similar) $4000 (taking into account the current dollar)

Tuning/Workshop time - $500-2000 (depends on how much you do yourself)

Boost Controller - $500

Exhaust - $1000

Suspension - $2000

Wheels - $2000 + tyres

That's almost the cost of buying somebody else's GTSt that's already modded. But obviously it depends on what you have done already.

Personally if I were in the same boat I'd get a 33GTR, amazingly I am pretty much in the same boat, except I'm holding off for a couple of years and I'll be buying a 34GTR instead :).

Nissan didnt make the GTR for no reason

unless your missus drives it alot

then sell the GTST then get a GTR

GTR with light mods and a tune will get 300awhp

Light mods being boost and a tune lol

It really depends on what YOU want to do with the car. You can make your auto handle the power (search for MV Automatics).

But it's each to their own, I like the idea of a GTR but I know I will miss the pure sliding fun.. if I did get a GTR it would be a daily and I'd keep my GTSt for super happy sliding fun time :(

yea def sell the GTST and fork out for a GTR :( have owned both gtst and gtr and def the GTR just for the wank factor + basic mods to the gtr will give u plenty of fun for a while just my opinion but at the end of the day its ur choice

Can you afford to buy a gtr and do work to it? If thats the case get the gtr, otherwise you can still get gts-ts pretty damn quik, stik a rb30 under it, thatll smooth out the big injectors and cams :) heaps of torque off boost aswell..

After the amount I've spent on a totally stock car to do up everything outside of the engine.. i think around the 16-17 mark, could be more you lose track of all the little bits you spend.. id say its much easier to buy one already modded and keep some money left over for a rainy day

I dislike how people refer to gtst's and gtr's in terms of how economical it is to get power out of the respective vehicles.. it should be about the driving experience and what YOU like/prefer.

Not everyone buys a gtst because they can't afford a gtr or it's maintenance/modification costs. Some people are purists and don't believe in 4wd for a "true" driving experience!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...