Jump to content
SAU Community

Recommended Posts

its r33 40th anniversary front bar

I was under the impression that the only body option for the 40th anniversary was the GTR rear wing, does anyone have any more info on this "optional" front bar?

  • 2 weeks later...

u can buy one here in japan :0.. took me a while. but found one to buy.. well, its closer then anyone can get so far, unless you buy fron nissan :P

http://www.importmonster.com.au/view?url=h...p;title=R33%20F

like i said before > its the closest anyone will get if there after a 40th anniversary front bar!.. i have not seen a fibreglass version in 6 years, and this is the best i can find if ppl need one.. there really isent much difference in the two bars, and it is shorter in hight just like the gtr style 40th anniversary front bar, so not hitting the ground .. take a look.. it really isent that different.

lol @ wrong bar..haha.. im just giving some ppl some options with the annoying series2 front end..

heres a pic so you all can look and compare the 2 bars with pictures :(..hhehe

to me they look the same but with extra air vents on the side being a aero version bodykit. umm which makes sence to me.. people who are talented enough to look at 2 pictures at one time will see they are the same exept one thing different, a extra air vent on the side of the bar.. still lmao at wrong bar..hehe

post-21353-1226785094_thumb.jpg

Edited by seriesII

no its ROFL at wrong bar now, they look noway near the same dude.. the middle part down the bottom is different the vents on the side u mentions is different, the whole front bar is flared out like vertex style theres not lil lip vent at the bottom.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...