Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Hi all,

Got a s1 r33 gts-t not long ago and am thinking about getting it serviced by a workshop instead of doing it myself like usual as I've gotten incredibly lazy.

I'm looking at getting a complete service done so just trying to figure out how much I'm about to throw out of my wallet.

Things i want to do:

all fluids

all belts

all filters

spark plugs

tune up

What do you guys reckon?

Who is the best to do this work but doesn't charge an arm n a leg?

you want the uleh tune cost lost mahet << the h is silent :D

100,000K service from boost works cost me $600ish so add a little more for extra belts which you prolly dont need and sparkies would set you back about $25 for coppers standard ecu doesn't go out of tune so that's really a buzz word

oil change is from memory $150 @ boostworx

Its done 104,000

well, more like "104,000" if you know what i mean... im guessing its in its mid to high 100's like most of em.

hence why id replace most of the stuff.

btw, the car has a flat spot at 5,000rpm on full power, not always there but sometimes it doesn't wanna go over without a fight. ideas?

im thinking spark plugs might be the (or part of) reason why.

sparkies usually give a popping type boost cut feel i would say not going over 5,000rpm could be dry solder on the AFM

i reckon i did my 100,000km @ 143,000 because i bought the car @ 123,000 and assumed it may have been done

also if you've boosted the car above factory it could be R&R stopping the car making peak performance so things don't go bang just nissans way of user protection

sparkies usually give a popping type boost cut feel i would say not going over 5,000rpm could be dry solder on the AFM

that's pretty much what it feels like, sort of misfiring but not so harsh.

the car is running stock boost.

where did you get your 100,000k service from? boostworx? what was done?

if u want a oil change, gear box and diff oil change i can do it for you. Brothers got a hoist i can use.

oils arent really a problem for me, i just thought if I'm gonna do it right might as well get everything done at one place as changing belts etc.. aren't something im confident in doing.

ill ring around a few places tomorrow but will let you know. :D

Edited by tx3_90
that's pretty much what it feels like, sort of misfiring but not so harsh.

Its fuel cut. Try getting a stronger fuel pump or if that doesnt work fuel cut defencer (use only if the ecu is cutting you off not fuel pump itself). Its nothing to do with sparkies.

Edited by Rocky88

Ryan for a private service/tune, or Boostwerks for a shop service/tune

($450 ~ $650 for 1st and 2nd option is the going rate)

best if you buy the parts yourself, ie 5L premium 10/40w oil, oil filter, fuel filter, coolant, power steer fluid, brake fluid, diff fluid (attessa as well for us 4wd'ers), bcpre6 .8mm copper sparkies,

grab a gates racing belt set for $300 (belt, tensioner, pulley, rings/seals)

oil and water pump for RB, around $450 there for new

might need the exhaust studs checked at same time.

probably advisable to check and replace gaskets, ie exhaust manifold, intake manifold, turbo gasket

but doing that adds up to a grand job.

although you then know she's good for a fair while longer now, probably for your ownership.

a safc and nismo adjustable fuel pressure regulator might be a bit of fun, to get around the 5000rpm spot, and gain some more power

but youd want a full exhaust system, good induction and intake, better fuel pump, and then the mods really start

so easy to fall under the spell LOL

:P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...