Jump to content
SAU Community

Recommended Posts

I can't compare the Hawk's (HPS) to anything other than stock brakes but they are definatley better than stock and lots less dust. I managed to source mine over the net and bought when the exchange rates were better. Managed to get 2 x fronts and 1 x rear for $270 Aust, I noticed now that the fronts are $97 US before freight and then the exchange rate, ouch.

I have to get some new pads for the r32 GTR calipers that are about to go on. Any suggestions?

Cheers

Andy

So what do you want for the front HAWKS???

Andy my brother has some Ultimates on a wicked R33 GTST with stock 4spot Nissan calipers, braided lines & for a car punching 368KW at the rear treads they hauled OK.

  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

So what do you want for the front HAWKS???

Andy my brother has some Ultimates on a wicked R33 GTST with stock 4spot Nissan calipers, braided lines & for a car punching 368KW at the rear treads they hauled OK.

I have someone else deciding if they want to buy the spare set I have at the moment. If he decides not to buy them you will be offered first refusal. I am selling them for $95 Aust.

Cheers

Andy

I have someone else deciding if they want to buy the spare set I have at the moment. If he decides not to buy them you will be offered first refusal. I am selling them for $95 Aust.

Cheers

Andy

Thanks for the Brake Pads Andy, great to meet a fellow enthusiast....should have the new slotted rotors in 2morrow & the car back on the road.....might even have the opportunity to meet up on Thursday evening with the rest of you.....if anyone is keen.

Now the only thing left to do is lock in some Dyno time & start mapping!!!! Did anyone attend the dyno day at Unique last weekend???

PS. Just saw a dear friends new Ride!!!! Wow Premium Silver R35 GTR, spectacular machine......Wonder if the VR38DETT slots into the STAG :banana:

Cheers

TT

post-639-1227009320_thumb.jpg

VR38DETT.htm

I was at the dyno day, TT, but I didn't put my car on the dyno. I was out there mainly to hlp out and sell some SAU merchandise, etc.

Typically, I was the only Stagea owner there. I'm guessing Alex would have come along, but I think he had prior commitments.

Thanks for the Brake Pads Andy, great to meet a fellow enthusiast....should have the new slotted rotors in 2morrow & the car back on the road.....might even have the opportunity to meet up on Thursday evening with the rest of you.....if anyone is keen.

Now the only thing left to do is lock in some Dyno time & start mapping!!!! Did anyone attend the dyno day at Unique last weekend???

PS. Just saw a dear friends new Ride!!!! Wow Premium Silver R35 GTR, spectacular machine......Wonder if the VR38DETT slots into the STAG :/

Trying to get there tomorrow myself......might have to work another Double shift though.

Trying to get there tomorrow myself......might have to work another Double shift though.

Damm rotors didnt arrive today so looks like they'll be in 2morrow & some bedding in is called for gents.....how many of you go through the Old Pacific HWY when heading up North?

There's usually quite a few who do the Old Pacific. I usually head up the freeway, but seeing as it was "zei201" Ian's first time on the Coastie cruise, I went with them on the Old Pacific last week too. It's been resurfaced in quite a few areas, so it's quite nice to drive now.

Damm rotors didnt arrive today so looks like they'll be in 2morrow & some bedding in is called for gents.....how many of you go through the Old Pacific HWY when heading up North?

Is there another road other than the old one......I heard that only Volvo's take the new one! :D

I will defiantly be on the Old PH.....hopefully I can control myself this time :P

yeah the old pac drive isnt bad at all compared to the old surface! im happy to go either way. if its raining ill take the freeway

C'mon dood if its raining you should definitelty take the Old road...give the 4wd a good work out :P

Damm rotors didnt arrive today so looks like they'll be in 2morrow & some bedding in is called for gents.....how many of you go through the Old Pacific HWY when heading up North?

Hey Tony, How are those new rotors and pads going?

Any news on the programing of the ECU?

Cheers

Andy

Hey Tony, How are those new rotors and pads going?

Any news on the programing of the ECU?

Cheers

Andy

Hi Andy,

The brakes work a treat...New set of slottled RDA rotors, the front HAWKS ,fresh Brake fluid and give the calipers a coat of heat resistant paint.....she's good as new!!!!

I spoke to the tuner today and he still needs some time before he's willing to work on the AXIS....this guys pretty meticulous and doesnt take any short cuts, if he could get his hands on a donor ecu that's willing to be sacrificed in the name of R&D....this would definitely speed the process up for all of us and explore greater avenues like potentially remapping shift points on the Gearbox.

Doing a piggy back is no problem....but there is more to be had with the remapping of the stock ECU and he's very confident there are good gains to be had.

To give you an idea he tuned a stock BMW 335i TWIN TURBO to 237RWKW.... remeber these came out with 225kW and 400nm at the flywheel, so we should potentially see between 180-200kw at all fours....time will tell!!!!

post-639-1227621140_thumb.jpg

About 132awkw is what I got my car dynoed, fully stock with no power mods.

http://www.skylinesaustralia.com/forums/Nm...-s-t227930.html

Btw Tony, have you put in the cooler yet? I'm keen to see how the tune went as well too :)

Eugene

Hi Eugene,

Any reason why you had the car dynoed in 3rd gear?

The intercooler wasnt a straight fit, there was some trimming of the reo bar needed for it to fit nicely.....there's no real noticable gain but we'll find out stats soon enough once we start mapping which unfotunately is taking a little longer than expected.

Some pics of the provisonal mounting of the cooler :P

Cheers

TT

post-639-1227789968_thumb.jpg

post-639-1227790006_thumb.jpg

post-639-1227790039_thumb.jpg

post-639-1227790081_thumb.jpg

Hi Eugene,

Any reason why you had the car dynoed in 3rd gear?

The intercooler wasnt a straight fit, there was some trimming of the reo bar needed for it to fit nicely.....there's no real noticable gain but we'll find out stats soon enough once we start mapping which unfotunately is taking a little longer than expected.

Some pics of the provisonal mounting of the cooler :D

Cheers

TT

Looking good.

Hey Tony,

To be honest Im not sure what gear they did the dyno, I never asked them about this.

And the cooler looks great. I've found in the past with my other cars (S15 and GT-R) that you've got to trim the reo bar and also the front bar as well. Now that I'm putting a fatter GReddy drag cooler into the gt-r, i'll need to trim more.

Good luck with the mods and tuning. I can't wait till you post up the results!

Btw, I need to get a new exhaust as my stock one is starting to fall apart. Can I ask what Fuji system you have on yours? Is it a Legais-R?

thanks

Hey Tony,

To be honest Im not sure what gear they did the dyno, I never asked them about this.

And the cooler looks great. I've found in the past with my other cars (S15 and GT-R) that you've got to trim the reo bar and also the front bar as well. Now that I'm putting a fatter GReddy drag cooler into the gt-r, i'll need to trim more.

Good luck with the mods and tuning. I can't wait till you post up the results!

Btw, I need to get a new exhaust as my stock one is starting to fall apart. Can I ask what Fuji system you have on yours? Is it a Legais-R?

thanks

Yep its the Legalis R.... Once everything is ready to go and we can start mapping, I'l also get a few other Vq25det Stagea owener to do a power run so we can compare results off the same dyno.

Cheers

TT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...