Jump to content
SAU Community

Recommended Posts

im the same, mates always saying the clunking makes my car sound like its f**ked. cant be f**ked changing it back and its is fun when it is needed :ninja:

if i was you i would buy or tighten up your vlsd (but not enough so that it acts like a locker) maybe put in two shims??? (read up on the shimming thread)

i also got weird looks when i was wearing my 2way in. i ended up driving up too a guy who was sitting in his car at the boat harbour drinking beer and explained to him what i was doing. some dumb b*&$^& was looking over at me dumbfounded as hell for ages

  • 2 weeks later...
  • 4 years later...

A friend of mine is offering me his 2way kaaz for 600km in the pumpkin, he has receipt. said he drove about 500km. selling it for half price.

Ideally, I would've of bought a 1.5way nismo gt, but... since i can get this good deal, I'm wondering is the clunk only noticeable when turning or its full time accel and deccel . does it even clunk on idle/cluch press ?

I'm interesting in this mod since I'm doing a good load of bushing, bought sticky direzza Z2 tires, fullrace ets, so I'm looking at improving my tracking with this mod, but into drifting at all tho. drag and daily.

thanks for your inpput and sorry if I offended someone by bumping this thread..

Really depends on the oil used too, a diff can be pretty "quiet" to use for normal driving and won't clunk as much as you think.. It will chirp and skip when doing u-turns or moving around a carpark but other than that it's not that bad.

Really depends on the oil used too, a diff can be pretty "quiet" to use for normal driving and won't clunk as much as you think.. It will chirp and skip when doing u-turns or moving around a carpark but other than that it's not that bad.

Did you see mine in the car park at the track day? Lol.

I have a 1.5. When cold it doesn't clonk at all. When hot it clonks like a mofo. Using the penrite 90-140 or something that was recommended somewhere else. Other thing is I have no bushes. R180 is solid mounted. So the R200 might be a bit nicer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...