Gtr Bov

[donkey]

hey all

what boost pressure can a brand new stock BOV hold (RB 26) im running about 330RWKW, 18lbs, engine 170k's, my mechanic said my stock ones where not holding boost/pressure, and replaced it, but want to go back to stock cause of dirty ol' shuffle, but he said not too

advice?

[R31Nismoid]

GTR BOV's can and have held over 30psi 600rwkw.

I know of 3 cars all over 550rwkw that used GTR BOV's without a problem, and there are no doubt many more out there

This has been covered before.

[archie01]

I'd say your mechanic has not had a lot of experience with a lot of high powered gtr's and this is why he said not to go back to stock bov's.

I'd take any future advice from him carefully.

You're doing the right thing by also posting on here and asking the same question.

Good luck with it.

[unique1]

another question on these gtr bov's, do they have to be plumbed back in to the intake or will they work fine venting to atmo? i am using the rb26 in a different car so plumbing them back is a pain, and is one gtr bov good enough for a 400rwhp setup?

[and3_3]

Yes you can make it atmo but make sure you seal up your intake so it doesn't leak.

Like R31nismoid said, GTR bov's can handle up to 600 rwkw so yes 400 rwhp will be fine.

[R31Nismoid]

another question on these gtr bov's, do they have to be plumbed back in to the intake or will they work fine venting to atmo? i am using the rb26 in a different car so plumbing them back is a pain, and is one gtr bov good enough for a 400rwhp setup?

GTR BOV's leak @ idle/low throttle

There cannot be used ATMO. Must be plumbed back. Thats the point of them

[unique1]

GTR BOV's leak @ idle/low throttle

There cannot be used ATMO. Must be plumbed back. Thats the point of them

thanks mate