Jump to content
SAU Community

Recommended Posts

i thought of this today while defect-proofing my car.

-remove the bonnet stand

-friendly hwp officer (concerned about harmful emissions) wants a look at your under bonnet party

-gets a tired arm from holding up bonnet

-cant get head down to have a good look around the engine bay

-can no longer hold up bonnet

-lets you go and defects your oversize wheels instead

no bonnet stand ftw!

Link to comment
https://www.sau.com.au/forums/topic/244942-avoid-defects-guaranteed/
Share on other sites

They will probably send you for inspection over the pits at a later date..

why cant they be friendly copz? "hey mate, sorry for the delay, im required to perform this breath test as part of our drink driving preventative measures. thanks, you can now be on your way. nice 'line by the way."

i would be the nicest cop ever. id harass commodores with mismatching wheels, and unroadworthy shitboxes. oh and hatchbacks with cannons.

i thought of this today while defect-proofing my car.

-remove the bonnet stand

-friendly hwp officer (concerned about harmful emissions) wants a look at your under bonnet party

-gets a tired arm from holding up bonnet

-cant get head down to have a good look around the engine bay

-can no longer hold up bonnet

-lets you go and defects your oversize wheels instead

no bonnet stand ftw!

:( If only it was that simple.

Actually funny story once, after i sold my s15 for a new BMW 325i I was pulled over for a breath test and the officer was soooooo polite; completely not what i was used to.

He called me 'sir' and i had to quickly glance at my passenger seat to make sure i didnt have anyone else with me lolz!

Im thinking jeeeezus the day I dont have a sportscar im 'sir' all of a sudden, better change then "licence, pop bonnet, bend over, blow in this." lolz

Bend Over??? WTF!

What's BEND OVER got to do with it? :(

Obviously you've never been pulled over by more then one officer at a time...

obviously it was light-hearted in nature. if they were determined to reap revenue from you im sure a missing bonnet stand wouldnt stop them.

Lolz when they search for internal contraband.

Now you know what they mean by the long arm of the law!

Cop: Ok you'll feel some pressure, Im just looking around

Victim: For what a parking spot, get it out

OK sorry Johnny,

Signing Off,

Generation 'W'

take the bus ahhaha true... yeh a few friends of mine years ago in some serious vl's used to say the bonnet release as stuffed so they would get a $75 fine, could been alot worse with everything under the bonnet counted, but no defect.

comin back from melbourne in the 33 with the mrs, got pulled over 3 times for RBT one stop had at least 2 cops, they were all grinning but the lady cop was nice and i didnt get anything.

Drove my mums beemer out in town once, cops did a u turn, followed me for ages, pulled me over to ask me whos car it is. then breathe tested me, searched it etc. the day i got off my p's not even the slightest glance.

hmm the fact that they make U open the bonnet is one thing thats wrong with that and the other is that if u dont have a bonnet stand they will make U hold it open so u will b the one with the sore arms from holding it open :P

hmm the fact that they make U open the bonnet is one thing thats wrong with that and the other is that if u dont have a bonnet stand they will make U hold it open so u will b the one with the sore arms from holding it open :P

yeh but i hurt my shoulder at work and cant do any heavy lifting...

they cant make you open the bonnet or hold it. if they want to have a look then they can do so all by themself. last time i popped it, but the cop actually went to the front and lifted it i think.

next time im going to flat out refuse. i figure they cant actually forcibly open your bonnet without a warrant, and i can easily say, "do you do this to everyone you pull over? no? well, ive got more important things to do, you can admire my car another time. good day officer."

Prior to that, what if you can't find the bonnet-release ???

That actually worked for my wife, she was coming back from work in the 33 and got pulled over. Knowing that since she was driving a "pick me" car much like the harassment we got when whenever we drove the Torana around.

But this time since she'd never popped the hood, she didn't actually know where the release leaver was. (albeit she didn't open her eyes to look for it). The nice Mr Plod, got annoyed with her and just let her go with a few words of advice about modifications.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...