Jump to content
SAU Community

Recommended Posts

My R32 GTR is currently stock apart from cat back exhaust with compliance cat. Making 180rwkw on 12psi crappy boost controller around 12psi drops to 11psi.

I am wondering what increase i'll get once i put on a pair of HKS pod filters, aftermarket Mines front pipe from cat to dumps, a new HDI boost controller and high flow cat.

Link to comment
https://www.sau.com.au/forums/topic/245148-increase-after-mods/
Share on other sites

if i was you i would put a decent air filter first in the stock air box say what 100bucks?

then either front pipes or cat next or both at the same time

then get a decent boost cont ebc leave the boost on stock tho

then a pfc

plus a tune then up the boost to around 12 13psi max on the stock turbos the power from stock boost 8 or 9 to 12 13 makes a big differnce!

by then you would need a good clutch to if you dont all ready have one

Basic format goes like this:

Exhaust (can keep stock dumps) + PFC + cam gears + 1bar boost = 250rwkw on stock turbos.

So 12psi its feasible you would be around 210-220rwkw depending on the dyno

Its more about driveability than anything. With the tider mixtures etc the car will driver nicer more so than make outright power.

220rwkw and i'll be happy.

I have a pair of HKS Sports filters, Mines front pipe and getting an X-Force High flow cat.

I am also looking for a Power FC but without the hand controller for now.

I'm also think of getting a pair of adjustable cam gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...