Jump to content
SAU Community

Fitted New Front Mount

Dunno

By Dunno,
in Engines & Forced Induction

 Share

Recommended Posts

Dunno Enthusiast

Dunno

Posted
Posted

Hey guys i just fitted FMIC to my r33 gtst but now when its starts comin onto boost it splutters for a bit and backfires (it makes a big bang) the only thing i could think off was the line from the wastegate that went to the standard intercooler pipe has no where to go now so i tried blocking it and it still does it can anyone help pls

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/245242-fitted-new-front-mount/
Share on other sites
Dunno Enthusiast

Dunno

Posted
  • Author
Posted

its only got zorst, bov and now the fmic. ive adjusted the blow off valve its one of them turbo smart ones with the 2 trumpets.and seems better but im not 100% the police where out so i cldnt do to much and i blew one of the pipes off (scared the S#@t outta me sounded like a gun shot)

Ill take it to my mechanic 2morrow to get the nipple fitted at the moment ive blocked it does this mean that it will be +++++ boost

i also have a PFC but it hasnt been hooked up yet wld it hurt to hook that up and take it for a drive with the base map just to see what comes up?

thanks for the help :ph34r:

RBwhatever Veteran

RBwhatever

Posted
Posted

Your spluttering would've been because one of your clamps on a join wasn't done up properly, hence why it blew off. It would've been leaking out air under pressure, thus the car is adding fuel for XX amount of air, but only X is making it to the motor....thus overfueling.

And you need that hose that goes to the actuator to have a pressure signal, cos if you don't, the wastegate won't open.....

**RB2530** Proficient

**RB2530**

Posted
Posted

Hang on a minute guys...he is talking about a line from the waste gate that has no where to go!!!

The only line I can think of on the stock waste gate which just happens to be a VERY VERY IMPORTANT one...It is the actuator feedback line!!

Dood it sounds like you are hitting airflow cut because your waste gate is just not functioning at all because it is getting zero boost feedback. This is bad!! It is NOT a tuning issue, it is a functionality issue.

Dont drive your car like this (off boost is ok only if you have too). On boost you have a fair chance stuffing your turbo because atm the boost is not controlled...

You need to plumb that line back into anywhere between you compressor outlet and your throttle body...doesn't really matter where.

TTT Grand Master

TTT

Posted
Posted

LOL... if it's a skyline and it backfires, it must be afm/spark/leak/coil related.

I wonder if other people actually read this part of his post..

the line from the wastegate that went to the standard intercooler pipe has no where to go now so i tried blocking it and it still does it

:)

the above = unlimited boost.

Stock ECU R33 with unlimited boost = cough, splutter, backfire at about 11psi (well apart from **RB3530** - his one is a little special)

Adriano Grand Master

Adriano

Posted
Posted

the above = unlimited boost.

Stock ECU R33 with unlimited boost = cough, splutter, backfire at about 11psi (well apart from **RB3530** - his one is a little special)

I think you mean cough,splutter,bang as the exhaust wheel leaves the equation

RBwhatever Veteran

RBwhatever

Posted
Posted (edited)
Hang on a minute guys...he is talking about a line from the waste gate that has no where to go!!!

The only line I can think of on the stock waste gate which just happens to be a VERY VERY IMPORTANT one...It is the actuator feedback line!!

Dood it sounds like you are hitting airflow cut because your waste gate is just not functioning at all because it is getting zero boost feedback. This is bad!! It is NOT a tuning issue, it is a functionality issue.

Dont drive your car like this (off boost is ok only if you have too). On boost you have a fair chance stuffing your turbo because atm the boost is not controlled...

You need to plumb that line back into anywhere between you compressor outlet and your throttle body...doesn't really matter where.

LOL... if it's a skyline and it backfires, it must be afm/spark/leak/coil related.

I wonder if other people actually read this part of his post..

:blink:

the above = unlimited boost.

Stock ECU R33 with unlimited boost = cough, splutter, backfire at about 11psi (well apart from **RB3530** - his one is a little special)

I wonder if other people actually read this part of his post..

its only got zorst, bov and now the fmic. ive adjusted the blow off valve its one of them turbo smart ones with the 2 trumpets.and seems better but im not 100% the police where out so i cldnt do to much and i blew one of the pipes off (scared the S#@t outta me sounded like a gun shot)

Ill take it to my mechanic 2morrow to get the nipple fitted at the moment ive blocked it does this mean that it will be +++++ boost

i also have a PFC but it hasnt been hooked up yet wld it hurt to hook that up and take it for a drive with the base map just to see what comes up?

thanks for the help :D

It was a boost leak because a clamp/join wasn't properly fitted, that is why the pipe blew off.

The cough splutter backfire is from overfuelling because it's not receiving all the air that was metered.

But yes, the actuator line is an important one. Get a pressure signal to it asap to avoid turbo failure.

Edited by KeyMaker
Dunno Enthusiast

Dunno

Posted
  • Author
Posted

problem solved i got a nipple put on to the intake pipe for the actuator hose to go back on apparantly without that hose the car was basically running as much boost as it could lucky i didnt i didnt thrash it :blink:

Thanks for the help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kaptain
      R33 general questions

      By Kaptain · Posted

      Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • GTSBoy
      R33 general questions

      By GTSBoy · Posted

      What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Kaptain
      R33 general questions

      By Kaptain · Posted

      Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • AdiR34
      Did tie rods. Steering now not "springing" back.

      By AdiR34 · Posted

      Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Keeper
      S A U N S W Club Membership

      By Keeper · Posted

      Got you mate. Check your email!
×
×
  • Create New...