Jump to content
SAU Community

Name These Fender Flares

Travis Bickle

By Travis Bickle,
in Exterior & Interior Styling

 Share

Recommended Posts

floody Experienced

floody

Posted
Posted

Nice as the Nismo ones are, they aren't what I'd call flares, they're just body mouldings. I think the OP actually wants more track, which they'd be useless for.

Love the car in the original post, flares or not, silver BNR33 with white rims is an epic win.

skylinecouple Experienced

skylinecouple

Posted
Posted

Those flairs on the original post are just beautiful. Would add immensely to track width and therefore tyre grip. But I guess for all the gay boys out there that like the poofy little ones on the purple car, well, they aren't flairs boys. Sort of like having a bonnet scoop that isn't actually sitting over a hole in the bonnet. Just glued on for the wank factor. Sorry.

Travis Bickle Collaborator

Travis Bickle

Posted
  • Author
Posted
Those flairs on the original post are just beautiful. Would add immensely to track width and therefore tyre grip. But I guess for all the gay boys out there that like the poofy little ones on the purple car, well, they aren't flairs boys. Sort of like having a bonnet scoop that isn't actually sitting over a hole in the bonnet. Just glued on for the wank factor. Sorry.

the car in the original post is a gtst.

CCW is making me a set of 18x11 "classics" so i can use 295-305mm tires with a +10 offset. ill probably still space them another 5-10mm so they fill the flares out. the center will be shotpeened graphite grey, lip polished, 4inch lip.

photo_main.jpg

first of all, yea im looking for more width but im also concerned with rubber patch on the road as its a 600ish hp BC stroked RWD car. im just looking for all the traction i can get. sure it will look like a steamroller but it'll hook better than a 18x9 rim with a 255 tire and handle better too.

cosmetically, they look awesome to me, theyre going on with a gtr replica bumper, hasemi sideskirts and an abflug rear bumper/diffuser, FRP doors, hasemi canards. to each his own. i have had a picture in my head for 4 months while collecting this pile of parts and these were the last piece other than the spoiler. (voltex)

i was able to track them down in the UK, the abflug ones. they look a skoach differnet than the ones pictured but i found the ones i want.

function before form. its all going into the paint booth first week of january for a full fitting and respray, r33 gtr white with double the clear coat, jambs and all.

Travis Bickle Collaborator

Travis Bickle

Posted
  • Author
Posted (edited)
oh yes... you must post pics... or I will hunt you down;)

ill put something up when its finished cosmetically. those CCW custom wheels are only 2350USD by the way. about, or more, than one would pay for some pizza cutter width volks with offsets that soar like falcon. they are an american site that caters more to corvette owners (about the only american car that can use an 11-12in wheel) so not too many people know about them.

Edited by Travis Bickle

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...