Jump to content
SAU Community

Gt35r Vs Garrett T04z - Discussion (just Post In This Thread To Create A Database)


Recommended Posts

My tuner (Ant Scali) has only just returned from Mt Buller.

He was working with Steve on the r35 development.

My car WILL be tuned Friday arvo.... then I will post up results as soon as possible.

26 with .84 T04Z

13065_226473479702_508809702_4240776_6507335_n.jpg

20 psi with little timing.

Just picked up the car, were doing some more mapping tonight. 4th gear pulls.

Doesn't feel to bad, mind you I have yet to have a proper drive of it.. Everytime I try to make a rationed opinion the adrenaline kicks in and I forget to keep an eye on how responsive it is.. lol..

Fix that boost control :D

If you can get it to pull to 21psi much sooner it'll be interesting to see what happens before/after.

So yes... that means get the graphs overlapped when you do :)

Funnily enough, almost a carbon copy of the one just above.

On a preliminary tune, it went 540rwhp (~400rwkw) at 19psi. Quite a bit lazier than the 35R though. On the same dyno, the 35R went 510rwhp on 26psi.

Am changing boost controller (as we weren't impressed with it's ability to hold boost) and tuning for 25psi next week. When that's done we'll print out a graph overlapping the 35R run with the T04Z run and I'll post it up.

Edited by Brockas

Sweet, sounds good, what boost controller did u have in it.

ya didnt think the Z could defy human nature with response. but will be interesting to see the true outcome and how fare apart they are.

Edited by nigel

Yeh at this stage it looks like it's going to be about 500rpm difference, but I believe the area under the curve will be greater with the Z.

I had a Greddy Profec B II, and I've just ordered a Blitz Dual SBC Spec-R.

Nar, overlapped Scatalotto's. His tromped mine everywhere, but we'll see how it goes with the new boost controller and some cam timing adjustments.

26 with .84 T04Z

13065_226473479702_508809702_4240776_6507335_n.jpg

20 psi with little timing.

Just picked up the car, were doing some more mapping tonight. 4th gear pulls.

Doesn't feel to bad, mind you I have yet to have a proper drive of it.. Everytime I try to make a rationed opinion the adrenaline kicks in and I forget to keep an eye on how responsive it is.. lol..

Did Paul tune your car? Is that the Twin scroll or just a single entry? Have to let me know how responsive it is etc

I've had fairly good results using the GT35...

Thinking of going to a GT37 or GT40 when i do a 3L bottom end...

car wasn't running it's best on the day of the dyno either...

post-27540-1261453111_thumb.jpg

Ok, mine went 580rwhp today.

Will pick it up and scan dyno sheet tomorrow.

Keen to see a comparison vs your gt35.

what boost to make 580rwhp?

How much longer (RPM) to reach full boost than gt35?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...