Jump to content
SAU Community

Recommended Posts

  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

have any of u driven a the new 6 lt comodore?

a mate has the brand new maloo ute.

he kept raving about it so i jumped at the chance when he offered me a drive.

6 speed manual 300 and whatever kws at the engine, exhaust etc , and i was most disapointed.

it would pull a 30 foot yaught up a big ass hill at 2000rpm but it just didnt want to rev.

felt more like a turbo diesel to me.

at the end of the day australian v8's arent built to go quick they are a zippy family car and that about it cos they are far to heavy.

my rbo 20 pulled 150rwkw which is f*k all really and i havent had any get away from me.

dont no about the new ones havent really been near any but hold some hope for v8s of the future as they were able to pry themselves away from the primitive idea of push rods and single cam. for the record i hate v8's but if they were smart enough to turbo or supercharge there v8s then different story N/A isnt the greatest concept for going quick.

i dont no many v8's that are going to beat a 32 lightest of all skylines that have 220 rwkw.

i pay the man with the comment atleast your not driving a holden:):unsure::)

Did he miss multiple gears, have 185 tyres on and spun the whole track, not know how to drive, blew a clutch, have it in reverse or what? A LS1 pushing that much power would smoke a 188rwkw skyline any day of the week even with a crap launch, so obviously there is more to the story. A VX clubby does a quarter in about 14 seconds give or take with variables. A stock RB25 does it in about 14-14.5, lets say one with 188rwkw does a 13.5 for arguments sake, once again give or take. You beat a 270rwkw clubby by 1.2seconds...... So his 270rwkw clubby is slower than a stock clubby?

Once again i ask, what's the rest of the story?

That proves to me you cant drive. A mate with one in his VL is running 180rwkw and ran a 12.3 on slicks. runs 12.7 on street tyres dude. He has a clean run and he was the one that cam up to me after and asked what the f**k i was running as he was waiting to slap me. I got a clean run and ran a 13.1 @ 106mph.

umm I dont know what sort of LS1's some of you have been driving, cause they must have been near dead or something.

I hopped in my mates VX SS with twin 2.5 exhaust and LS1Edit and it dosen't really powerband until around 4000rpm, which is reached surprisingly quickly!

The old 5 litre dosen't like to rev much though (at least in a stock or near stock form)

i was racing (yeh i know irresponsible) but thats what this thread is about. being irresponsible on the street against holdens

i was playing one day with the latest holden monaro GTO (the 6 litre) had the 307kw sticker on the back. ill admit the thing did look nice and honestly this thing was so loud i could not hear my car at all !!!! and my car is pretty loud. obviously he had done his exhaust extractors god knows what else. and when we both gave it a genuine hit rolling at about 30k/hr there was nothing in it. we were dead neck to neck. and i knew from that screaming V8 he was giving it his all. and so was i. and this was before my Toshi remap. they are no way as quick as what people think.

whoops forgot to add my car is R33 but hey another hit for the skylines

Edited by DrewII
That proves to me you cant drive. A mate with one in his VL is running 180rwkw and ran a 12.3 on slicks. runs 12.7 on street tyres dude. He has a clean run and he was the one that cam up to me after and asked what the f**k i was running as he was waiting to slap me. I got a clean run and ran a 13.1 @ 106mph.

Where did i ever mention my driving? I stated FACTS about the rough times these cars run down the drags in stock form or with slight work done to them. So your comment about my driving is completely irrelevant. I said a RB25 with 188rwkw roughly runs a 13.5 and it does. Is your RB25 in a R33 or is in in a S13, however your sig says its an RB20 so which one is it?

Ok so you ran a 13.1, congrats, you said you beat the VX clubby by 1.2 seconds, therefore it ran a 14.3 correct? Once again i ask, whats the rest of the story since a standard VX clubby will run that, not a 270rwkw one......

You are honestly wondering why i think your story is bullshit?

Edited by PM-R33
Where did i ever mention my driving? I stated FACTS about the rough times these cars run down the drags in stock form or with slight work done to them. So your comment about my driving is completely irrelevant. I said a RB25 with 188rwkw roughly runs a 13.5 and it does. Is your RB25 in a R33 or is in in a S13, however your sig says its an RB20 so which one is it?

Ok so you ran a 13.1, congrats, you said you beat the VX clubby by 1.2 seconds, therefore it ran a 14.3 correct? Once again i ask, whats the rest of the story since a standard VX clubby will run that, not a 270rwkw one......

You are honestly wondering why i think your story is bullshit?

My car is now a r32 with a 25det in it. Pretty stock with only 189.7rwkw. I honestly say i keep up if not beat any V8 i have raced up here. I like all cars but i have not been beaten by one yet.

The vl ran a MPH 108 and 60ft of 2.1 i believe. That was with slicks and a et of 12.3

The pink VL is the one i am talking about.

That white ss ute he is racing i believe would be a ls1 yeah. Correct me if i am wrong as i dont know much bout them. The ute is a fellow names Brad Stott. He has cams a remap and full exhaust. Look how much he gets slapped by and i pretty sure there both running slicks. The VL is pushing 180rwkw.

the vl is also a auto.

so would be reading higher power if it was a manual.

but i agree ls1 ls2 's are shit.

jap technology has been around for near on 20 yrs, yet aus keeps producing this heavy underpowered garbage.

why have imports become so popular? because the amount of car you get for your money simply cant be matched in aus.

i for one would never buy another aussie car. (4x4 excluded as japanese dont really use them.)

look at were ford is heading with the xr6

its about time they got rid of the "found on rubbish dump" attitude that most people over 30 have of them.

the old ea falcon etc were an absolute discrace to ford, and should never have been produced with a made in australia claim.

surely we can make something better then that.

holden flirted with the jap tech with the vl and for the life of me i cant see what positives they gained by canning it.

they had a light family car that went well. why stop making them.

especially when you watch that vid above showing a 88 model car easily beating 20 yrs of holdens technology.

what a joke.

holden used that motor out of desperation....

they simply could not update the old 202 any further and it was WAAAAY underpowered and thirsty.

they then developed their own "australian" motor *cougbuickcough*

and borrowing an american motor is ok cause its a v8 and that aparently makes everything ok....

You have to remember how heavy all of these new commodores/falcons are. You chuck a LS1/LS2 into a lighter car like a S13 and it definetely won't feal boring. Youtube "RX7 LS1" and watch how quick those things are even in basic stock form.

At the end of the day, technology means weight, simple as that. Perfect example the R35. Today's demands with 100 airbags, electronics superior to that of some home computers, zoned climate control, electric seats with 100 different motors, stereo systems with 30 speakers etc makes it very difficult to build a car targeted to a majority of people (families, work vehicles, towing etc) that is still going to be under 1400kg.

You have to remember how heavy all of these new commodores/falcons are. You chuck a LS1/LS2 into a lighter car like a S13 and it definetely won't feal boring. Youtube "RX7 LS1" and watch how quick those things are even in basic stock form.

At the end of the day, technology means weight, simple as that. Perfect example the R35. Today's demands with 100 airbags, electronics superior to that of some home computers, zoned climate control, electric seats with 100 different motors, stereo systems with 30 speakers etc makes it very difficult to build a car targeted to a majority of people (families, work vehicles, towing etc) that is still going to be under 1400kg.

I agree with this. A mate of mine has a VX i think it is. A clubby with over 500rwkw fully worked with a 3.3lt Whipple. He is running low 11's yet another guy up in Darwin runs 11.7 with under 500hp in his gtr. The commo weighs in at a massive 2100kg yet my skyline is about 1400 i think. Not confirmed yet but still the power to weight is crazy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...